Ativa DXC240C, DSC200C, DXC160C manual How to Use Your Shredder, Setup Tilt / pullout basket models

How to Use Your Shredder

Setup - Tilt / pullout basket models

Install casters on bottom of unit (if applicable). Mount the shredder head securely on the rim of the cabinet. Insert the inclined receptacle into the cabinet. The elevation on the front side underneath the receptacle must be fixed exactly inside the corresponding cavity on the bottom of cabinet. Close the receptacle by simply pushing it toward the cabinet. Connect the power cord to any standard 120 volt AC outlet.

Note: Some shredders include a built-in safety mechanism that requires the shredder to be cor- rectly mounted on the supplied wastebasket and the pullout basket to be completely closed. Lining the wastebasket with a plastic bag will interfere and may keep the shredder from func- tioning properly.

Caution: All shredders have very sharp, exposed blades on the underside. Please use care when mounting the shredder on to the cabinet.

If your shredder came with casters, they may need to be installed by inserting the pegs into the four holes on the bottom of the cabinet.

DSC200C

DXC160C

DXC240C

SPECIFICATIONS:

Shredding Capacity	Shred Type	Shred Size	Throat Width
20 Sheet	Stripcut	6 mm	240 mm
		0.24 in	9.45 in
16 Sheet	Crosscut	4 mm x 30 mm	240 mm
		0.16 in x 1.18 in	9.45 in
24 Sheet	Crosscut	4 mm x 40 mm	240 mm
		0.16 in x 1.57 in	9.45 in

Feed Opening

LCD Screen

Pullout Basket

Illustration is for reference only. 5