Input Ground Switch, Input Level Switch

except when operating at low levels. For most applications the control should be set between 0dB and +20dB.

A setting of 0dB on the SUBWOOFER LEVEL control is the correct starting point when setting up a sound system. From there the sound can be adjusted for best sound.The 0 dB mark re- fers to the setting that will give full power when the line input is used and the input signal is at a level of +4 dBV.This also is the setting to give a sensitivity of 2.83 Vrms (1 watt 8-Ohms) for 100 dB spl when set for speaker level input.With

a typical full range companion speaker this will give flat response. In either line or speaker operation it will usually be desirable to set the control at +3 to +6 to give some bass boost at low power levels.At levels approaching full power the built-in limiter will automatically reduce the gain to prevent over powering the subwoofer. Operation with settings significantly above +12 may clip the circuitry in the sub- woofer reducing the dynamics of the music. Setting the subwoofer gain above +12 is only appropriate at low operating level.

3. Input Ground Switch

The LS700P expects the source feeding it to be grounded. A system comprised entirely of ungrounded equipment may cause the LS700P to hum or buzz. If you have a buzz or hum problem, try setting the switch to the "GROUNDED" position. The switch should oth- erwise be left in the "UNGROUNDED" position. Do not use the grounded position with an amplifier operating in bridged mode or when the sleeve of the input signal is live.

4. Input Level Switch

A switch is provided to switch input levels be- tween speaker level and line level. The switch should be set to speaker level when the LS700P is fed from the output of an amplifier or pow- ered mixer. The line level position is for when the LS700P is fed a signal from a processor, elec- tronic crossover or the output of an unpowered mixer. When using the line level mode the use of balanced (Tip, Ring, Sleeve) cables will reduce the sensitivity to hum and buzz.

5. Stereo Input and Parallel Thru Jacks

For normal operation, connect the LS700P just like an ordinary speaker, along with the Full-Range speakers and set the Input Level

		1
POWER		2
HIGH	125 Hz
FREQUENCY
CUT OFF

	100 Hz		150 Hz
SUBWOOFER				3
LEVEL	-5 0	+10		3
LEVEL	-5 0	+10
			+20

	+24
	-10
	dB
INPUT GROUND
UNGROUNDED
GROUNDED	4
INPUT LEVEL	4
SPEAKER
LINE

I LEFT N (mono) P U T

PARALLEL	5
THRU

RIGHT NP

PARALLEL

THRU

switch to SPEAKER. If the audio source does not have a ground pin on the AC cord, the Input Ground switch must be set to GROUND (GND). The LS700P may be plugged in before or after the Full-Range speakers. Use the Left and Right Inputs when using a single LS700P in a stereo system. Use either the Left or the Right inputs when using separate LS700P's for each side (or when used in a Mono system).The LS700P does not alter the signal to the Full-Range speak- ers, and will not draw any power from the host amplifier driving them. Please note that an external crossover is not necessary.

As well as accommodating the full range speakers, the PARALLEL THRU jacks allow many LS700Ps to be connected in a string (or otherwise in parallel). There is no practi- cal limit to the number of LS700Ps that may be connected together.

AT HIGH POWER LEVELS WHEN THE LIMITER IS OPERATING INCREASING THE SUBWOOFER LEVEL CONTROL WILL NOT INCREASE THE OUTPUT. DO NOT INCREASE SETTING WHILE OPERATING AT HIGH LEVELS.

ES700P specifications

The Elite ES700P is a state-of-the-art gaming chair that fosters comfort, versatility, and robust performance for gamers and professionals alike. Designed with a keen focus on ergonomics, it ensures maximum support during those long hours of play or work. The chair is equipped with an adjustable high backrest, allowing users to find their best position easily, which is crucial for maintaining proper posture.

One of the standout features of the Elite ES700P is its 4D armrests. These armrests are not just vertically adjustable; they can also move forwards, backwards, and side to side, catering to various seating preferences. This flexibility helps to reduce strain on the shoulders and wrists, providing a personalized fit that enhances overall comfort.

The chair is constructed with premium materials, including high-density foam padding that offers excellent cushioning without sacrificing durability. The upholstery is crafted from breathable fabric, promoting airflow to keep users cool during prolonged use. Notably, the Elite ES700P is also available in various color options, allowing users to express their style while fitting seamlessly into their gaming setup.

Another impressive technology incorporated into the Elite ES700P is its sturdy metal base. This base not only adds to the chair's stability but also supports a smooth 360-degree swivel mechanism and a reliable gas lift system that enables easy height adjustment. The chair's silent casters ensure smooth movement on different surfaces, whether you're gliding over carpet or hardwood.

For added convenience, the Elite ES700P features a reclining function that allows users to tilt back the chair to their desired angle, perfect for relaxing or taking breaks in between intense gaming sessions. The tilt tension knob gives users control over the chair's resistance, adapting to their body weight for a more stable seated experience.

In sum, the Elite ES700P combines advanced ergonomics, customizable features, and high-quality materials to deliver an unparalleled seating solution. Whether for professional use or gaming marathons, this chair stands out as an excellent choice for those seeking both style and functionality in their furniture. With its thoughtful design, the Elite ES700P promises to elevate the user experience and enhance performance in any setting.