Hafler IRIS manual Operation, Muting System, Volume/ Balance System

Page 6

OPERATION

Turn-On/Off logic

Muting System

Volume/ Balance System

CAUTION:

The EPL switch and the tape MONITOR switches, explained later, are often the cause of an apparently “dead” system, when they have accidentally been left engaged. Always check them first if a system is found “dead” on turn-on. For now, make sure that all six of the group of round-button switches are intheirOUT position.

When IRIS is powered-up, the MUTE legend will light alone, along with a small GREEN indicator, between the knobs, called the VOLUME/BALANCE (V/B) indicator. The V/B indicator shows that the IRIS panel knobs are determining VOLUME and BALANCE. Its operation is explained in the remote section.

During this period, none of your KEY inputs will be accepted into memory. This period is about five seconds, during which the MAIN outputs of the preamplifier are muted.

At the end of this turn-on

safety period, the MUTE indicator will

go out and the TUNER

legend will light. TUNER mode is

designed as a reset state to facilitate easiest turn-on for background music etc. Any of the other seven inputs may now be selected by their appropriate KEY.

The MUTE KEY causes the MUTE light to illuminate, and the preamp to fade down approximately 20dB. This mode is used for phono cueing and at any other convenient time, such as answering a phone etc. Depressing the NORMal KEY restores normal level. The two-key format is used so that you always know whether you are muting or de-muting.

The level-control system in IRIS is unusual and uniquely suited to our goal of combining superb sound with high convenience. It is an indirect type in which no audio signals are passed through the panel controls.

Image 6
Contents Hafler Iris Preamplifier Table of Contents IntroductionInstallation Input Connections Power ConnectionsSelection PhonoPage Volume/ Balance System OperationMuting System EPL Tape Loop Systems Iris Functional Block Diagram ONE Channel Shown Recording System KEY 1 ifTape Monitoring Switches Volume Balance V/B Command TransmissionsAutomatic Transfer Control Remote V/B Resolution Record Security Umbilical Systems Battery Replacement Sx Serial eXternal KEYOptional Cartridge Loading InstructionsImproper cartridge frequency-response Iris Specifications RMS Factory Service and Limited Warranty

IRIS specifications

The Hafler IRIS is a noteworthy advancement in the realm of audio technology, particularly designed for audiophiles and sound engineers seeking high fidelity listening experiences. This speaker system epitomizes the confluence of innovative design and high-performance engineering, making it a favored choice among sound enthusiasts.

One of the standout features of the Hafler IRIS is its utilization of advanced crossover technology. The IRIS employs a meticulously designed passive crossover network that ensures a seamless transition between different frequency ranges. This technology allows for crisp highs, detailed mids, and powerful lows, creating a well-balanced sound profile that can accurately reproduce even the most complex audio tracks.

The speaker design incorporates a unique enclosure that minimizes distortion and enhances acoustic performance. This sturdy construction not only mitigates unwanted vibrations but also provides an optimal acoustic environment for sound reproduction. The IRIS is crafted with high-quality materials, including dense MDF (Medium Density Fiberboard), which further contributes to its robust build and resonance-free performance.

Another significant characteristic of the Hafler IRIS is its driver configuration. The system typically includes a high-performance woofer, midrange, and tweeter, each meticulously selected to ensure compatibility and performance consistency. The woofer is designed to deliver deep bass response, while the midrange driver excels in delivering vocals and instrumental clarity. The tweeter is engineered to reproduce high frequencies with precision, ensuring that every note resonates with clarity.

Hafler has also integrated innovative technologies to enhance user experience. With features like bi-wiring capability, audiophiles can connect their amplifiers directly to the woofer and tweeter separately, allowing for improved control over each driver’s performance. This flexibility enables users to tailor their listening experiences to meet personal preferences and requirements.

Furthermore, the Hafler IRIS is designed to fit seamlessly into a variety of audio setups, whether in professional studios or home listening environments. Its sleek aesthetic allows it to complement modern décor, making it an attractive addition to any space.

Overall, the Hafler IRIS delivers a compelling mix of design, technology, and sound quality, making it a preferred choice for those who seek a sophisticated listening experience. Its commitment to high performance and user-centric design principles ensures that it stands out in the competitive landscape of audio technology.