Step 2- Using Your Memorex M-Flyer Pilot TravelDrive
Your new Memorex
1.Extend the USB connector by pressing on the rear of the drive until the USB connector is locked in the open position as shown in Fig A. Insert your new
Note: You may be required to wait up to a few minutes after inserting your drive for the first time while your new TravelDrive is configuring itself to your computer system. (Click “OK” or “Agree” to any driver prompts should they appear).
Press here to retract
USB Connector
Fig B
Fig A
Press here to extend USB connector
2.Restart your computer now to ensure driver installation and drive setup.
3.At the desktop screen
Important Note: Do not remove the USB Flash Drive while the LED is flashing!
Interrupting the data flow while the LED is flashing can potentially corrupt existing data that is being transferred as well as other data stored on the drive. You may also potentially lose access to your drive and your ability to retrieve any files stored on the USB Flash Drive. Once the LED returns to an unblinking state, the data transfer operation is complete; and it is safe to remove your drive.
Important Note: Although your TravelDrive is compatible with either a USB 2.0 or USB 1.1 port, performance is maximized when using a USB 2.0 port. Transfer speeds will vary and differ significantly when connected to USB 1.1 port. Actual read and write speeds may vary depending on file types, OS, etc.
Software systems Requirements (PC only):
•Pentium III 300MHz or higher
•Windows 2000 (SP4)/ XP (SP2) / Vista
Installation and using the Portable Vault™ Security Software (Optional)
Memorex Provides added security and protection with the Portable Vault™ security software.
The software has been preloaded onto your drive and can be installed by
•Follow the