Video output settings, Clock and calendar settings

2.5. Video output settings

For best quality, set the output resolution to match your display’s native resolution to avoid image scaling and blur.

If you are connecting to an LCD TV, the resolution setting is most likely 1366x768, 1280x720, or 1920x1080. If you are connecting a LCD computer monitor, projector, or plasma display, refer to the device specifications for the best matching setting.

Press the space bar to fill in the star (*) before pressing the enter key for <OK>.

2.6. Clock and calendar settings

Set the correct time zone, time, and date. Daylight Saving (DST) rules can be configured in Set time zone.

2.7. Setting a password

To prevent unauthorized modification of player settings, set a player password to hide the menu.

From the top level menu, select “Change password” to set a password.

IMPORTANT: Once a password is set, you can only access the menus by connecting a USB keyboard and pressing CTRL + ALT + DELETE (3-key combination) simultaneously. You may connect the keyboard at any stage of player operation or before/ during boot-up.

If you forget the password, you will need to reset the device. See

Factory reset.

2.8. Factory reset

If you forget a system password you have set, you must reset the system to regain access to the player.

Using the reset button

Disconnect power cable from the player unit

Press and hold the RESET button

Connect the power cable while holding the RESET button until status light flashes (about 15 seconds)

Please wait while the system drive is being formatted