M-Systems Flash Disk Pioneers DiskOnChip 9x12 BGA-to-32-Pin DIP Adapter Ordering Information

DiskOnChip 9x12 BGA-to-32-Pin DIP Adapter

2.3Inserting DiskOnChip into the Adapter

To insert a DiskOnChip 9x12 BGA device into the adapter:

1.Identify the alignment ball (A) of DiskOnChip, at location C1 in the ball diagram. Refer to the relevant data sheet for more information on the ball diagram.

2.Place DiskOnChip in the socket so that the alignment ball faces the white line on the PCB. See Figure 1 for the location of the white alignment line.

3 Ordering Information

3.1DiskOnChip

Ordering information for DiskOnChip devices supported by the BGA-to-32-pin DIP adapter is listed in Table 2.

Table 2: Ordering Information for Supported DiskOnChip Devices

Device	Capacity	Product Number
	16MB	MD3831-D16-V3Q18-T
DiskOnChip Millennium Plus	32MB	MD3831-D32-V3-T
	64MB	MD3331-D64-V3-T
	16MB	MD3831-D16-V3Q18-T
Mobile DiskOnChip Plus	32MB	MD3331-D32-V3Q18-T
	64MB	MD3331-D64-V3-T

3.2DiskOnChip Accessories

Ordering information for DiskOnChip accessories that can be used with the BGA-to-32-pin DIP adapter is listed in Table 3.

Table 3: Ordering Information for Compatible DiskOnChip Accessories

Accessory	Product Number
ISA Bus EVB for 3V DIP	DIP-ISA-V3-EVB
ISA Bus EVB for 5V DIP	DIP-ISA-V5-EVB
PCI EVB	PCI-EVB-V1
GANG Programmer, Revision C	DOC-DIP-GANG

93-SR-002-26-6L 5