Hafler GX2800CE manual Wiring Diagrams, Stereo Mode, Biamp Mode, Connector Wiring

Page 20

Wiring Diagrams

STEREO MODE

CE SPEAKON

Connector

Wiring

1.Connect signal from source to both CH A and CH B inputs.

2.Move Biamp/Stereo switch to Stereo input mode.

3.Move Stereo/Mono switch to Stereo mode.

4.Select desired speaker load (8/4/2) for each channel – CH A & CH B loads do not need to match.

5.Connect appropriate speaker load 8/4/2to 5-way binding posts. CE units: Connect as shown above for Dual SPEAKONs or Single 4-Wire SPEAKON.

6.Adjust CH A & CH B level controls independently.

BIAMP MODE

CE SPEAKON

Connector

Wiring

1.Connect signal from source to CH B input.

2.Move Biamp/Stereo switch to BIAMP input mode.

3.Move Stereo/Mono switch to Stereo mode.

4.Select desired speaker load (8/4/2) for each channel — CH A and CH B loads do not need to match.

5.Connect appropriate speaker load 8/4/2to 5-way binding posts. CE units: Connect as shown above for Dual SPEAKONs or Single 4-Wire SPEAKON.

6.Adjust CH A & CH B level controls independently.

– 18 –

Image 20
Contents Page Declaration of Conformity Table of Contents Power Sources Power Cord ProtectionPower Cord Grounding CleaningLEA LAS Instrucciones Conserve EL Manual DEL PropietarioCuadros DE Advertencias Siga LAS InstruccionesErforderlicher Reparaturservice ServiceInstruktionen Lesen Betriebsanleitung AufbewahrenSuivre LE Mode Eemploi Lire LES InstructionsConserver LE Guide DE Lutilisateur Considérations DE Mise EN GardeLeggete LE Istruzioni Conservate IL ManualeAvvertenze Seguire LE IstruzioniSpecifications Technical Design Features WHY a NEW Amplifier TOPOLOGY?Introduction What Else Distinguishes These AMPLIFIERS?Universal Line Voltage Input Protection CircuitsDesign Features GX2800 Level Controls Adjusts the gain of the amplifierDesign Features GX2800CE Installation POWER/THERMAL RequirementsCooling NoiseOutput Audio Ground CHASSIS/FLOAT SwitchPower Switch Operation InputDaisy Chain Output Earth Grounded Source EquipmentDelay Floated EquipmentCrossover FrequencyPhase BIAMP/STEREO SwitchSTEREO/MONO 70V 100V Switch CD Horn EqualizationLoad Switch SignalProtect ThermalWiring Diagrams Stereo ModeBiamp Mode Connector WiringConnector Wiring Connect to CH a output Bridge Mono Mode70V Mono Mode 100V Mono Mode 70V Stereo ModeService Policy and Limited Warranty What is CoveredMAN-3643-A 01 BM

GX2800, GX2800CE specifications

The Hafler GX2800CE and GX2800 are high-performance power amplifiers designed for audiophiles and professional sound reinforcement applications. Renowned for their reliability and audio fidelity, these models represent a seamless combination of innovative technologies and robust engineering that ensures impeccable sound quality.

One of the standout features of the Hafler GX2800 series is their high current output capability. This allows the amplifiers to drive a wide variety of loudspeakers, including those with demanding impedance requirements. With a power output of 280 watts per channel at 4 ohms, these amplifiers deliver sufficient power for large venues while maintaining clarity and dynamic range. The ability to handle low impedance loads without compromising performance is a hallmark of the Hafler brand.

The GX2800CE and GX2800 are equipped with Hafler's proprietary feedback technology, reducing distortion and enhancing overall sound quality. This technology ensures that the amplifiers perform well across the audio spectrum, allowing for rich, detailed sound reproduction. The low total harmonic distortion (THD) figures also contribute to a cleaner audio signal, ensuring that the listener experiences music as it was intended.

Another notable characteristic of the GX2800 series is its built-in protection circuitry. This includes short-circuit protection, thermal overload protection, and output DC protection, which work together to safeguard the amplifier and connected speakers during operation. The durable design of the chassis provides further reliability, suitable for both studio environments and live sound applications.

The amplifiers feature balanced XLR and unbalanced RCA inputs, providing versatility for various audio setups. Additionally, the rear panel includes binding post speaker outputs for secure connections to loudspeakers.

For those seeking a powerful and reliable amplifier that does not compromise on audio quality, the Hafler GX2800CE and GX2800 are exceptional choices. With their array of features designed to enhance performance and user experience, these amplifiers stand out in the competitive audio equipment market, making them ideal for both home and professional uses. Whether you are mixing in the studio or providing sound for a live performance, the Hafler GX2800CE and GX2800 will deliver exceptional results, making them a worthy investment for any audio enthusiast.