Sony SDT-S9000/BM manual Scsi ID Setting, Configuration Switches Setting *1

Page 14

SCSI ID Setting

The SCSI ID is set by the rotary switch on the rear panel. Press the + or - buttons to move the number up or down, respectively.

As shipped from the factory, the SCSI ID is set to 0. Press the switch buttons, if necessary, to select the SCSI ID number you require.

Precautions

The SCSI ID must be different from IDs of the other peripherals on the SCSI bus.

As shipped from the factory, SCSI parity is enabled and Term power is ON. Since the terminating resistor inside the drive is disabled, a SCSI bus terminator must be connected to the SCSI bus before use.

Before changing the SCSI ID setting, be sure to turn off the power with the POWER switch on the front panel.

Configuration Switches Setting *1

Sony SDT-S9000/BM has a set of configuration switches located on its bottom side. These drives can be made ready to run in major workstations by setting the configuration switches as shown in the following table.

*1 with the SDT-S9000/BM

Part 2. Preparation 13

Image 14
Contents DDS Drive Unit DDS Drive Unit Safety Regulations Owners RecordThis Notice is Applicable for USA and Canada only Table of Contents How to Use this Guide About DDS Drives FeaturesPart 1. Introduction Useable Cartridges System ComponentsPart Names and Functions Front panelDrive is reading or writing Rear Panel Part 2. Preparation Supplied ItemsPrecautions InterconnectionsScsi ID Setting Configuration Switches Setting *1SDT-S9000/BM Configuration Switch Settings for Unix How to use the DDS Drive Part 3. OperationCartridge Removal Taking Care of the Drive Part 4. Care and MaintenanceSafety Considerations Avoiding DamageAbnormal occurrences Taking Care of Cartridges Use PrecautionsStorage Precautions Head Cleaning How to CleanSpecifications SDT-S9000/BM AppendixOperating Systems Backup Software Vendors Phone Numbers Third Party Support Contact In the USAOperating Systems Backup Software Vendors Phone Numbers

SDT-S9000/BM specifications

The Sony SDT-S9000/BM is a high-performance tape drive designed primarily for professional data backup and archiving applications. This tape drive is part of Sony’s renowned line of storage solutions, providing users with a reliable, efficient, and versatile means of safeguarding critical data. It utilizes the AIT (Advanced Intelligent Tape) technology, which has become a market favorite due to its high capacity, quick access times, and durability.

One of the standout features of the SDT-S9000/BM is its impressive storage capacity. This tape drive can store up to 90 GB of native data and an astounding 270 GB of compressed data on a single cartridge. This makes it an ideal choice for businesses and organizations that require the ability to back up large amounts of data without needing to constantly replace tapes.

The SDT-S9000/BM boasts a rapid data transfer rate, capable of achieving speeds up to 6 MB/s in native mode and up to 18 MB/s when compression is enabled. This efficiency not only saves time during backup processes but also enhances overall productivity, allowing users to focus on their core activities without prolonged interruptions for data management.

Moreover, the tape drive employs advanced technologies such as error correction and intelligent data management features. These capabilities ensure that backups are performed with high integrity and reliability. The built-in ECC (Error Correction Code) helps in identifying and correcting data errors during the read and write processes, minimizing the risk of data loss.

As for connectivity, the SDT-S9000/BM is equipped with SCSI-2 interface support, making it compatible with a wide range of systems and environments. This versatility allows it to integrate seamlessly into existing infrastructures, proving to be a cost-effective investment for users looking to enhance their data storage capabilities without overhauling their entire systems.

In addition to its technical features, the SDT-S9000/BM is built with robust materials, ensuring its longevity and durability in demanding operational settings. Its compact design also allows for easy installation in both desktop and rack-mounted configurations, catering to diverse user needs.

In summary, the Sony SDT-S9000/BM is a powerful tape storage solution that combines high capacity, rapid data transfer rates, and advanced error management features. Ideal for businesses seeking dependable backup solutions, it ensures that critical data is protected and easily accessible whenever needed. With its proven technology and reliable performance, the SDT-S9000/BM remains a formidable option in the competitive field of data storage.