Sony VPCSB manual HDD Reassembly, HDD Reinstallation

VPCSB Series Hard Disk Drive Replacement Instructions

Step 4. Arrange the Brackets & screws as shown above. Set the old HDD aside.

HDD Reassembly

Step 1. Place the new Hard Drive in the same position as the old Hard Drive so that it aligns with the Brackets as shown.

Step 2. Re-install the four (4) Hard Drive Bracket screws to secure the Brackets to the New Hard Drive.

Step 3. Re-install the HDD Cable to the Hard Drive by aligning the connectors.

Note: The wide end of the Cable attaches to the Hard Drive at this step.

HDD Reinstallation

Step 1. Reseat the Hard Drive into the Hard Drive Bay.

Step 2. Re-install the four (4) Hard Drive screws holding the Hard Drive assembly in place.

FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866-651-7669 FROM 9:00 AM TO 11:00 PM EST

P/N 989202617 Rev. B 3/4