Sony AITi260 manual Remodeling from 5.25 Model to 3.5 Model

Page 11

Remodeling from 5.25" Model to 3.5" Model

You can remodel the 5.25" model to the 3.5" model yourself.

1

2

Remove the 2 screws for each side rail.

Take the side rail off.

Side Rail (L)

Side Rail (R)

11

Image 11

Contents AIT Drive Contents AITi260 Tape Drive Introduction Product FeaturesTransportation PrecautionsInstallation OperationExample of Scsi set-up Parity Disable Jumper InstallationScsi Connection/Setting the Scsi ID Data Compression Control DIP switch Option Switches DIP SwitchDIP Switch Positions For 3.5 Standard Height Mounting HolesDepth 0.10 in max For 5.25 Half HeightRemodeling from 5.25 Model to 3.5 Model Orientation Front Panel for 3.5 Standard Height OperationLocation of 3 LEDs LED Indication for Drive StatusUnloading a Cassette Using a Cleaning TapeDrive Operation Loading a CassetteEmergency Cassette Removal Procedure Return the drive to Sony for repair Tape guide surface Supported Scsi Messages Supported Scsi CommandsInterface Implementation Product Specifications SpecificationAir-cooling Requirement Temperature and Humidity RangePower Requirements Suspended ParticulateThird Party Support Contacts In the USA Operating Systems Backup Software Vendors Phone NumbersBackup Software Vendors Phone Numbers Computer Peripherals Product Marketing Sony ContactsFor further information, please contact Sony Electronics Inc., Technical SupportSony Marketing of Japan Sony Korea Corporation Edmk CP Sales & Marketing TeamSony Gulf FZE Computer Display & Peripheral Div