Sony pr960f specifications Installing or Removing the Tilt/Swivel Base

Page 5

INTRODUCTION

Installing or Removing the Tilt/Swivel Base

1.Turn off the system and all attached peripherals.

2.Carefully set the monitor upside down.

Remove the Tilt/Swivel Base:

1.Squeeze and hold the latches.

2.Pull the tilt/swivel base to the rear of the monitor and lift to remove the base.

Installing the Tilt/Swivel Base:

1.Align the base with the slots on the bottom of the monitor and insert the tilt/ swivel base into the slots.

2.Push the tilt/swivel base firmly toward the front of the monitor until the latches click into the locked position.

English

InstallRemove

5

¨ ¨ ¨

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Table of Contents Safety Instructions English Introduction Package ContentsIntroduction Installing or Removing the Tilt/Swivel Base Color Picture Tube SpecificationsRecommended Use of the Monitor Front User Controls Controls and AdjustmentsControls and Adjustments User Converge Purity 100 Energy Declaration Compatibility Technical InformationTechnical Troubleshooting TroubleshootingDimensions
Top Page Image Contents