Recommended Use of the Monitor

INTRODUCTION

When setting up and using the monitor, pay special attention to the follow- ing for optimum performance:

•Do not use your monitor against a bright background or where sunlight or other light sources will shine directly on the screen.

•The monitor should be placed just below eye level (10°~15°) for optimum viewing.

•Set the monitor's brightness to match the ambient room light.

•For optimum focus, the contrast control should not be set to the maxi- mum level unless the input signal level is extremely low. Also, the bright- ness control should be set to a point where the overall background area just begins to disappear.

•Allow adequate ventilation around the monitor so that the heat from the monitor can properly dissipate.

•Neither the monitor itself, nor any other heavy objects, should rest on the power cord. Damage to the power cord can cause fire or electrical shock.

•Keep the monitor away from high-capacity transformers, electrical motors, or other strong magnetic fields.

•Your monitor should not be used in damp, dusty, or dirty areas.

•Handle your monitor with care when transporting it.

English

CAUTION !

•Do not scrap or knock the surface of CRT with a pen, a screwdriver and so on.

•Clean the CRT surface with a lint-free, nonabrasive, soft cloth, and should not use the solution or glass cleaner containing corpuscles like an abrasive, alcohol and an alkaline solution.

♦♦♦