Soundstream Technologies SPL40 owner manual Surface Mounting

1/4” 6-32 machine	Turn Clockwise to Lock
screw

Flush mount cup

Mounting surface

FIGURE 1	Spring
	clip	FIGURE 2

Surface Mounting:

1)Drill one 5/16" diameter hole for the tweeter lead wires and two pilot holes for the mounting screws.

2)Attach the surface mount plate with two flat head screws.

3)Pass the lead wires through the hole. See figure 3.

4)Engage the locking holes on the back of the tweeter onto the tabs on the plate and rotate counter-clockwise until locked. See figure 4.

Turn Counter-Clockwise to Lock

FIGURE 3

FIGURE 4

5

40.pub	Friday, September 10, 1999 21:04
page 5