ILY Enterprise CD/DVD Duplicator user manual Operating Guide Select Speed, Select Source

OPERATING GUIDE

7.SELECT SPEED

This operation will allow you to adjust and select the Duplication Speed for the three different disc types: CD, Audio CD, and DVD.

a.Press either button ￿ , ￿ to navigate the menu. 7. SELECT SPEED, and press OK

b.You will see three disc types: CD, Audio CD, and DVD. Press either button ￿ , ￿ to select a disc type and press OK to confirm your selection.

c.Press either button ￿ , ￿ to select the burning speed.

7.Set Burn Speed

Press OK

￿&

￿, ￿

￿

[Burn Speed]

CD = 52

￿ Press	Setting normal
	data CD
OK
	burning speed

￿￿,

￿￿,

￿￿

￿￿

[Burn Speed] Audio CD = 40

[Burn Speed] DVD = 8

￿Setting Audio

Press	CD burning
OK	speed
￿	Setting DVD	Note: This is only
Press	burning	available on DVD
OK	speed		
		duplicators

8.SELECT SOURCE

Use this function to set a Optical Drive or Hard Drive Disk as the Master Reading Source.

a.Move to 8. Select Source and press OK.

b.Press ￿, ￿ to select either a HDD or an Optical Drive with assigned number as the reading source.

8.Select Source

￿ Press OK￿

￿move￿, ￿ to select￿

Source Drive ==> HDD:ST380021A

Source Drive ==> D#1:DVD-ROM

￿Press OK to finished setting

Note: If HDD was selected as Source, then please follow 12.1 Select Image ‘s instructions to learn how to

select image files as your reading source..

Note: Each Optical Drive will be assigned a Drive # according to their installation sequence. If there is no HDD installed, then Drive#1 is set as the Reading Source.

Copyright © 2005 by ILY Enterprise, Inc. All Rights Reserved.