Emotiva pmn manual Connection Diagrams, Stereo Connection, Bridged Subwoofer Connection

Page 10

Connection Diagrams

Stereo Connection

This diagram shows the BPA-1 connected to 2 speakers in a stereo configuration. The crossover switch is in the FLAT position. Speakers can be 4-8 Ohms.

This connection diagram shows

 

a typical use of the BPA-1 in

 

a stereo configuration driving

This configuration delivers 75 watts into

one left channel and one right

channel speaker. This setup

each 4 Ohm speaker. You can also use 8

is ideal for a second zone or

Ohm speakers in this configuration.

whenever the main speakers in

 

the room are assembled in a 2

 

channel configuration.

 

Bridged Subwoofer Connection

This diagram shows the BPA-1 connected to 1 subwoofer in a bridged configuration. The LEFT input is the mono input for the bridged configuration and will come from your receiver or preamplifier’s sub- woofer output. The crossover switch is in the LOWPASS position. Crossover frequency should begin around 100Hz and be fine tuned once the system is playing as it depends on the frequency response of the other main speakers in your system. The subwoofer should be no less than 8 Ohms.

This connection diagram shows

 

a typical use of the BPA-1 in a

This configuration delivers 150 watts into

bridged configuration driving

a single subwoofer. This

a single 8 Ohm speaker. You MUST use

setup is ideal for non powered

a speaker with a minimum of 8 Ohms

subwoofers or the woofer

nominal impedance for the bridged

portion of a multi-element

configuration!

speaker that has bi-amp

 

capabilities.

 

Page 10

Image 10
Contents Page Table of Contents Safety Precautions AV123 NEC National Electrical Code Standards Antenna Grounding Outside the HouseThank You for your BPA-1 Purchase Unpacking the BPA-1 Recording the Serial NumberProfessional Power Amplifier Features Front Panel LayoutRear Panel Layout Cooling FanStereo Connection Connection DiagramsBridged Subwoofer Connection Bridged Dual Mono Connection Daisy Chained BPA-1 AmplifiersAmplifier shuts down unexpectedly Troubleshooting GuideNo Sound from one or more speakers connected to the BPA-1 Turn-on and turn-off thumpsOther Probable Causes of Noise Problems with the whole A/V SystemHum Noises in the Speakers AV123 Contact InformationBPA-1 Technical Specification Emotiva Disclosure Limited WarrantyService Assistance for the BPA-1 EmotivaAV123

pmn specifications

Emotiva PMN, or the Emotiva Professional Monitor Network, is a high-performance audio system designed for audiophiles, producers, and sound engineers seeking exceptional sound quality and accuracy. This innovative product line showcases Emotiva's commitment to delivering studio-grade sound reproduction in a compact, efficient package, making it ideal for both professional settings and home audio setups.

One of the standout features of the Emotiva PMN is its active design, incorporating built-in power amplifiers that minimize the need for external amplification. This results in a more streamlined audio setup, allowing users to simplify their workspace while still enjoying robust and powerful sound. Each monitor in the PMN series typically features a bi-amped configuration, dedicated amplifiers for both the woofer and tweeter, ensuring that each frequency range is optimally powered for superior performance.

The PMN series utilizes advanced driver technology, including high-quality woofers and soft-dome tweeters, which work in tandem to deliver a balanced sound signature. The drivers are designed to provide low distortion, high sensitivity, and wide frequency response, enabling users to hear every detail in their audio. Additionally, Emotiva employs precision crossovers to ensure a seamless transition between drivers, enhancing the overall listening experience.

Connectivity is another strongpoint of the Emotiva PMN. The monitors support a variety of input options, including XLR and TRS connections, making them versatile enough to integrate into different audio setups. This feature is especially beneficial for recording engineers and producers who require adaptability for various equipment and studio environments.

Moreover, the cabinets of the PMN monitors are constructed from high-quality materials to minimize vibrations and resonance. This thoughtful design choice allows for clearer, more accurate playback, which is crucial for critical listening and mixing environments. The aesthetic appeal is also noteworthy, as the modern design of the PMN series ensures they complement any studio or home decor.

Overall, the Emotiva PMN brings together cutting-edge technology, exceptional sound quality, and user-friendly features, making it an excellent choice for anyone serious about audio production or enjoying high-fidelity sound in their home. Whether in a professional studio or for listening pleasure, the PMN series stands out as a reliable and effective solution in the ever-evolving world of audio technology.