Sony 2140847 manual Command Description VPN 1 Type, VPN1 Status, Sntp Server Address, VPN Gateway

Page 44

AirLink Helix User Guide

Command

Description

 

 

VPN 1 Type

Tunnel Disabled or IPsec tunnel. Use this option to enable or disable the VPN tunnel. If

 

custom settings are used, they will be saved and the tunnel can be disabled and re-

 

enabled without needing to reenter any of the settings. The IPsec VPN employs the IKE

 

(Internet Key Exchange) protocol to set up a SecurityAssociation (SA) between the Helix

 

and a Cisco (or Cisco compatible) enterprise VPN server. IPSec consists of two phases to

 

setup an SA between peer VPNs. Phase 1 creates a secure channel between the Helix

 

VPN and the enterprise VPN, thereby enabling IKE exchanges. Phase 2 sets up the IPSec

 

SA that is used to securely transmit enterprise data. For a successful configuration, all

 

settings for the VPN tunnel must be identical between the Helix VPN and the enterprise

 

VPN server.

 

 

VPN1 Status

Disabled, Not Connected, or Connected. This indicates the current status of the VPN

 

connection. Use this as part of troubleshooting a VPN connection.

 

 

SNTP Server Address

The Simple Network Time Protocol Server (SNTP) ensures the clock on the Helix VPN is

 

synchronized to standard time. The default NTP server is pool.ntp.org. You can specify any

 

preferred NTP server. Both the VPN server and client must use the same SNTP address.

 

 

VPN Gateway

The IP address of the server that this client connects to. This IP address must be open to

Address

connections from the Helix Box.

 

 

Remote Subnet (IP

The default configuration is 0.0.0.0/0 which will direct all traffic over the GRE tunnel.

Addr Mask)

 

 

 

Pre-shared Key 1

Pre-shared Key (PSK) used to initiate the VPN tunnel.

 

 

My Identity

If these fields are left blank, My Identity will default to the WAN IP address assigned by the

 

carrier and Peer Identity will default to the VPN Server IP. For a fully qualified domain name

 

(FQDN), these values should be preceded by an ‘@’character (@www.domain.com). For

 

user-FQDN, these values should include a username (user@domain.com)

 

 

Peer Identity

Required in some configurations to identify the client or peer side of a VPN connection.

 

This defaults to the VPN server IP address.

 

 

Negotiation Mode

Main Mode or Aggressive. To operate the onboard VPN under Aggressive mode, enable

 

this configuration. By default the Helix operates under Main Mode. Aggressive mode offers

 

increased performance at the expense of security.

 

 

IKE Encryption

DES, 3DES, or AES. Determines the type and length of encryption key used to encrypt/

Algorithm

decrypt ESP (Encapsulating Security Payload) packets. 3DES supports 168-bit encryption.

 

AES (Advanced Encryption Standard) is supports 128 bit encryption.

 

 

IKE Authentication

SHA1 or MD5. Can be configured with MD5 or SHA1. MD5 is an algorithm that produces a

Algorithm

128-bit digest for authentication. SHA1 is a more secure algorithm that produces a 160-bit

 

digest.

 

 

IPSec Encryption

DES, 3DES, or AES. Determines the type and length of encryption key used to encrypt/

Algorithm

decrypt ESP (Encapsulating Security Payload) packets. 3DES supports 168-bit encryption.

 

AES (Advanced Encryption Standard) supports 128 bit encryption.

 

 

IPSec Authentication

SHA1 or MD5. Can be configured with MD5 or SHA1. MD5 is an algorithm that produces a

Algorithm

128-bit digest for authentication. SHA1 is a more secure algorithm that produces a 160-bit

 

digest.

 

 

IKE SA Life Time

180 to 86400. Determines how long the VPN tunnel is active in seconds. The default value

 

is 28,800 seconds, or 8 hours

 

 

38

2140847

Image 44
Contents AirLink Helix Page Important Notice Safety and Hazards Regulatory Information Open Source Patents Copyright Trademarks · ReadmeContact Information AirLink Helix documentation draft createdAirLink Helix documentation revised USB Chapter addedContents Configuring WAN/Cellular Configuring Security Regulatory Information What Else Do You Need to Get Started? IntroductionWhat’s Included with the AirLink Helix? Getting Going the quick version CdmaConnecting a Computer to the AirLink 2 Helix Connecting Through EthernetConnecting Through Wi-Fi Where to Find More HelpHardware Overview Physical InterfacesTurning On the AirLink Helix Status LightsCellular Antennas LEDsCellular Antennas Wi-Fi Antennas Reset ButtonPower Connector SIM SlotRemove the SIM Pushing SIM in to the SIM slotUSB Connection USB modems Compass 895 and CompassUSB Modem connection ACEmanager Status AboutPage AirLink Helix User Guide 2140847 Configuring AirLink Helix ACEmanagerStatus HomeWAN/Cellular LAN/WiFi Address / status of the LAN port Address / status of the WAN / LAN portWill show Mixed or G-Only Number of connected clientsServices SecurityAbout Network Credentials Configuring WAN/CellularWAN/Cellular WAN Failover Setup IP Passthrough How it worksAddressing/VLAN Configuring LAN/WiFiLAN/WiFi WiFi Global Shared WEP WPA/WPA2 Personal WPA Enterprise Optional and used when the primary server is not availableWhen the primary is unavailable WiFi Disabled or Enabled. By default this is set to DisabledGlobal DNS Primary Global DNS AddressCommand Description Alternate Primary Alternate SecondaryGroup ID PriorityAirLink Helix User Guide 2140847 VPN Command Description VPN 1 Type Negotiation ModeIKE Authentication IPSec AuthenticationCommand Description Perfect Forward Configuring the tunnelSecrecy IPSec Key GroupGRE TTL Router hops not in secondsPort Forwarding and DMZ Configuring SecuritySecurity Port Filtering Outbound MAC FilteringACEnet Configuring ServicesServices ACEmanager Dynamic DNSManagement Snmp LandingACEmanager Services Management Snmp DataDefaults Configuring AdminAdmin Command Description Debug Enabled DebugDebug Output Baud RateACEmanager Admin Log LogAirLink Helix User Guide 2140847 Routing Technical SpecificationsAdministration Hardware PhysicalIndustry Canada Regulatory InformationFederal Communications Commission RF Exposure Antenna ConsiderationsWeee Notice AirLink Helix User Guide 2140847

2140847 specifications

Sony 2140847: A Cutting-Edge Technology Marvel

Sony has long been synonymous with innovation and quality in the tech industry, and the Sony 2140847 is a testament to this legacy. This advanced product showcases a range of impressive features and technologies designed to enhance user experience, whether for entertainment or productivity.

One of the standout characteristics of the Sony 2140847 is its vibrant display. With a high-resolution screen, the device delivers stunning visuals that bring content to life. Whether you are watching movies, playing video games, or browsing the web, every detail is rendered with remarkable clarity and color accuracy. The display technology incorporates advanced HDR capabilities, ensuring that users can enjoy a broader range of brightness levels and more vivid colors.

Under the hood, the Sony 2140847 is powered by a state-of-the-art processor that ensures smooth performance and multitasking capabilities. This powerful engine enables the device to handle demanding applications, making it suitable for professional use as well. Coupled with ample RAM, users can switch between tasks seamlessly without lag or interruption.

Audio quality is another area where Sony excels, and the 2140847 is no exception. The device features an advanced audio system that leverages Sony's cutting-edge sound technologies to provide crystal-clear audio output. Whether you are listening to music, watching movies, or engaging in video calls, the immersive sound experience enhances the overall enjoyment and makes it feel as if you are part of the action.

Connectivity options are plentiful with the Sony 2140847. Equipped with the latest wireless technologies, including Wi-Fi 6 and Bluetooth 5.0, users can connect to various devices with ease and enjoy faster data transfer speeds. This ensures a reliable connection for streaming and gaming, as well as compatibility with a range of peripherals, from headphones to smart speakers.

The design of the Sony 2140847 is sleek and modern, making it not only functional but also aesthetically appealing. Its lightweight and portable form factor make it easy to carry, perfect for on-the-go users. Furthermore, the build quality reflects Sony's commitment to durability, ensuring that the device can withstand daily wear and tear.

In conclusion, the Sony 2140847 encapsulates the brand's dedication to innovation and quality. With its stunning display, powerful performance, exceptional audio, and robust connectivity, it stands out as a versatile device suitable for a wide range of applications. Whether you are a gaming enthusiast, a media lover, or a professional in need of a dependable tool, the Sony 2140847 is a worthy investment that promises to elevate your digital experience.