Key to Cal/outs

1.+12V Connected to fuse or circuit breaker, then battery’s positive post.

2.Ground Main ground connection. Bolt to a clean chassis ground in the vehicle.

3.Remote - Remote turn-on input from the head unit. Accepts +12V.

4.Speaker Output Connections-Channels 1 8 2.

5.Speaker Output Connections Sub Channels.

6.Crossover Adjustment Pot - Crossover frequency setting for the subwoofer low pass filter.

7.Input Level Variable from 40mV to 2.5V-Subwoofer Channel.

8.Crossover Switch Select “IN” to use the amplifier’s internal high pass filter, or “OUT” to bypass the internalcrossover.

9.Crossover Adjustment Pot-Crossover frequency setting for the channels 1 & 2 high pass filter.

10Input Level -Variable from IOOmV to 2.5V-Channels 1 & 2.

11Inputs - Right and left channel inputs for channels 1 & 2 and the subwoofer.

12.LED Indicates amplifier power on.