Emotiva UPA-2 manual Rear Panel Layout, RCA Audio Inputs/Outputs

Page 10

Rear Panel Layout

RCA Audio Inputs/Outputs

These inputs are for signal input

for each channel on the UPA-2. Simply connect the appropriate input to your preamplifier/processor or other preamp level audio device. Loop outputs and inputs are paralleled.

Master Power Switch

This rocker switch provides the master power for the UPA-2. After it is in the ON position, the amplifier can be turned on manually from the front panel switch or automatically with the trigger input via 3.5mm input jack.

Level Control

When set to Minimum,the amplifier has no output;when set to Maximum, it has 32dB of gain and will match the gain structure of all the other Emotive Amplifiers.(Note:Loop out is not controlled by it.)

Remote Turn On Jack (output)

Speaker Outputs (5 way Binding Posts)

These are the speaker outputs. The 5 way binding posts accept stripped speaker wire, banana plugs (single or dual), or spade connectors. Be sure to observe correct polarity when connecting speakers and be sure that the wires do not touch between positive and negative terminals.

.This 3.5mm jack accepts a +12 volt output for remote activation of the other device. This mates directly with the Emotiva products trigger in and supplied cable. If building your own cable, center is positive and outer shield is negative.

Remote Turn On Jack (input)

This 3.5mm jack accepts a 5-12 volt input for remote activation of the UPA-2. This mates directly with the Emotiva processor trigger out and supplied cable. If building your own cable, center is positive and outer shield is negative.

Power Receptacle

This is a standard IEC 2 prong power receptacle. It is advised that this amplifier have a direct connection to a wall outlet. Do not plug into a “power strip”.

Page 9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents UPA-2 Table of Contents UPA-2 Technical Specifications Limited Warranty Safety Precautions Toll Free 877 EMO-TECH NEC National Electrical Code Standards Antenna Grounding Outside the HouseThank You for your UPA-2 Purchase Inventory Unpacking the UPA-2Recording the Serial Number Emotiva UPA-2 Stereo Power Amplifier Front Panel LayoutRear Panel Layout RCA Audio Inputs/OutputsAC Power Considerations Installation and ConnectionsPhysical Placement Output Connection Considerations Input Connection ConsiderationsConnection Tips for Superior Sound Connecting a 7.1 Preamp/Processor Connection DiagramsConnection using a 7.1channel preout to UPA-2 Connection using a 7.1 channel preout to UPA-2 12V Trigger Connections Series Series and Parallel Speaker ConnectionsParallel Technical Note about Multiple Speaker Connections Troubleshooting Guide No Sound from one or more speakers connected to the UPA-2Turn-on and turn-off thumps Hum Noises in the SpeakersOther Probable Causes of Noise Problems with the whole A/V SystemOne or more RED lights on the Front Panel are Blinking UPA-2 Technical Specifications Limited Warranty Emotiva Audio Corp Emotiva DisclosureEmotiva Audio Corp

UPA-2 specifications

The Emotiva UPA-2 is a versatile and powerful two-channel power amplifier designed to elevate your audio experience. Offering a combination of high-performance specifications and exceptional build quality, it is an ideal choice for both music enthusiasts and home theater aficionados looking to enhance their sound systems.

One of the standout features of the UPA-2 is its robust power output. It delivers a continuous power of 125 watts per channel into 8 ohms, and an impressive 200 watts per channel into 4 ohms. This high power output ensures that even the most demanding speakers can be driven with ease, providing clarity and detail across the audio spectrum. Whether you are listening to intricate orchestral compositions or thumping bass-heavy tracks, the UPA-2 is designed to reproduce audio accurately and without distortion.

The UPA-2 employs a high-quality Class A/B amplifier design, which combines the best characteristics of both Class A and Class B technologies. This results in efficient operation without compromising sound quality. The amplifier features an advanced Thermal Management System, ensuring it remains cool and reliable even during extended listening sessions. Additionally, its dual mono construction minimizes crosstalk between channels, leading to a clearer stereo image.

Another noteworthy characteristic of the UPA-2 is its solid build quality. Encased in a sturdy chassis, it is designed to withstand the rigors of daily use while providing a sleek and modern aesthetic. The amplifier features gold-plated RCA inputs and a detachable power cord for added convenience and connectivity. Furthermore, the UPA-2 is equipped with a comprehensive protection circuitry system, safeguarding against potential overcurrents, overheating, and short circuits.

In terms of compatibility, the Emotiva UPA-2 can seamlessly integrate into a variety of audio setups. It pairs well with both high-efficiency speakers and demanding high-fidelity systems, making it a versatile choice for various listening environments. The amplifier's balanced XLR inputs also support professional-grade equipment, further enhancing its utility.

Ultimately, the Emotiva UPA-2 stands out for its combination of power, efficiency, and sound quality. Its thoughtful engineering and feature set make it an exceptional choice for anyone looking to enhance their audio experience, proving that it truly deserves a place in any serious music lover's setup.
Top Page Image Contents