DE500 HF Drivers
100 W continuous program power capacity 1” horn throat diameter 44 mm (1.7 in) aluminium voice coil Titanium diaphragm
1000 – 18000 Hz response
107 dB sensitivity Optimized Neodymium magnet assembly with shorting copper cap
LF Drivers LF Nd Drivers Coaxials HF Drivers Horns
Specifications
Throat Diameter (1) | 25 mm (1 in) |
Nominal Impedance (2) | 8 ohm |
Minimum Impedance | 7.6 ohm |
Nominal Power Handling (3) | 50 W |
Continuous Power Handling (4) | 100 W |
Sensitivity (1W/1m) (5) | 107 dB |
Frequency Range | 1 |
Recommended Crossover (6) | 1.5 kHz |
Voice Coil Diameter | 44 mm (1.7 in) |
Winding Material | Aluminium |
Inductance | 0.11 mH |
Diaphragm Material | Titanium |
Flux Density | 1.9 T |
| |
Mounting and Shipping Info | |
|
|
Two M6 holes 180° on 76 mm (3 |
|
in) diameter |
|
Three M6 holes 120° on 57 mm |
|
(2.2 in) diameter |
|
Overall Diameter | 102 mm (4 in) |
Depth | 51 mm (2 in) |
Net Weight (1 unit) | 1.4 kg (3.1 lb) |
Shipping Weight (8 units) | 12.2 kg (28.6 lb) |
Shipping Box (8 units) | 230x230x160 mm |
| (9x9x6.3 in) |
1Driver mounted on B&C ME45 horn
2Also available in 16 ohms, data upon request
32 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range . Power calculated on rated minimum impedance.
4Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
5Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. 612 dB/oct. or higher slope