Sony RM-PJM10 On safety, On illumination, On preventing internal heat build, On cleaning, Quality

1-4

B	Overview
Precautions
On safety
•	Check that the operating voltage of your
	unit is identical with the voltage of your
	local power supply.
•	Should any liquid or solid object fall into
	the cabinet, unplug the unit and have it
	checked by qualified personnel before
	operating it further.
•	Unplug the unit from the wall outlet if it is
	not to be used for several days.
•	To disconnect the cord, pull it out by the
	plug. Never pull the cord itself.
•	The wall outlet should be near the unit and
	easily accessible.
•	The unit is not disconnected to the AC
	power source (mains) as long as it is
	connected to the wall outlet, even if the
	unit itself has been turned off.
•	Do not look into the lens while the lamp is
	on.
•	Do not place your hand or objects near the
	ventilation holes. The air coming out is
	hot.
•	Be careful not to catch your fingers by the
	adjuster when you lift up the projector. Do
	not push hard on the top of the projector
	with the adjuster out.
On illumination
•	To obtain the best picture, the front of the
	screen should not be exposed to direct
	lighting or sunlight.
•	Ceiling-mounted spot lighting is
	recommended. Use a cover over
	fluorescent lamps to avoid lowering the
	contrast ratio.
•	Cover any windows that face the screen
	with opaque draperies.
•	It is desirable to install the projector in a
	room where floor and walls are not of
	light-reflecting material. If the floor and
	walls are of reflecting material, it is
	recommended that the carpet and wall
	paper be changed to a dark color.

On preventing internal heat build-
up
After you turn off the power with the I / 1
key, do not disconnect the unit from the wall
outlet while the cooling fan is still running.
Caution
The projector is equipped with ventilation
holes (intake) and ventilation holes
(exhaust). Do not block or place anything
near these holes, or internal heat build-up
may occur, causing picture degradation or
damage to the projector.
On cleaning
•	To keep the cabinet looking new,
	periodically clean it with a soft cloth.
	Stubborn stains may be removed with a
	cloth lightly dampened with a mild
	detergent solution. Never use strong
	solvents, such as thinner, benzene, or
	abrasive cleansers, since these will
	damage the cabinet.
•	Avoid touching the lens. To remove dust
	on the lens, use a soft dry cloth. Do not use
	a damp cloth, detergent solution, or
	thinner.
•	Clean the filter at regular intervals.
On repacking
•	Save the original shipping carton and
	packing material; they will come in handy
	if you ever have to ship your unit. For
	maximum protection, repack your unit as
	it was originally packed at the factory.
On LCD projector
•	The LCD projector is manufactured using
	high-precision technology. You may,
	however, see tiny black points and/or
	bright points (red, blue, or green) that
	continuously appear on the LCD projector.
	This is a normal result of the
	manufacturing process and does not
	indicate a malfunction.

Features

High portability

•Light weight/small size

This projector has been miniaturized to approx. 2.9 kg (6 lb 6 oz) in weight and B5-file size through the adoption of a retractable mechanism. A carrying handle is equipped with the projector, so you can carry it easily with your computer.

Reduced noise
Because the projector uses Sony’s unique
cooling mechanism, noise has been reduced.
High brightness, high picture
quality
•	High brightness
	Adopting the high-efficiency optical
	system and the 120 W UHP lamp allows
	high brightness (VPL-CS2: light output
	600 ANSI lumen, VPL-CX1: light output
	550 ANSI lumen) and excellent
•	uniformity on the picture.
	High resolution
	VPL-CS2:
	Three 0.7-inch, about 480,000 pixel,
	SVGA panels provide a resolution of 800
	⋅ 600 dots for RGB input and 600
	horizontal TV lines for video input.
	VPL-CX1:
	Three 0.7-inch, about 790,000 pixel, XGA
	panels provide a resolution of 1024 ⋅ 768
	dots for RGB input and 750 horizontal TV
	lines for video input.
Simple setup
•	Simple setup with external equipment
	This projector is preset for 37 kinds of
	input signals. You can project images from
	an external signal source just by
	connecting the equipment with the
•	supplied cable and pushing the APA key.
	Compatible with USB (Universal Serial
	Bus) hub function
	You can connect an USB equipment (e.g.,
	USB mouse) to the projector, and also
	control the projector by using the
	application software (CD-ROM) supplied

	with the projector from a computer
	operated with Windows 98, Windows 98
	SE or Windows 2000. Using this
	application software, you can open a file
	you want to use for your presentation with
	the supplied Remote Commander.			Overview
Easy presentation
•	Multi function Remote Commander
	with mouse control functions
	You can operate a computer connected to
	this projector with the Remote
	Commander since the unit has a build-in
•	mouse receiver.
	Digital ZOOM and FUNCTION keys
	on the Remote Commander
	The Digital ZOOM allows you to enhance
	your presentation by zooming in on the
	image.
	You can allocate a presentation file to the
	FUNCTION keys by using the application
	software (CD-ROM) supplied with the
	projector. Just pressing the FUNCTION
	key opens the file immediately.
Accepts various input signals
•	Scan converter loaded
	This projector has a build-in scan
	converter that converts the input signal
	within 800 ⋅ 600 dots (VPL-CS2) or 1024
•	⋅ 768 dots (VPL-CX1).
	Compatible input signals
	This projector accepts video signals of
	composite, S video, and component as
	well as VGA, SVGA, XGA, and SXGA
•	signals, which all can be displayed.
	Compatible with six color systems
	NTSC, PAL, SECAM, NTSC4.43	1)	, PAL-
	M, or PAL-N color system can be selected
	automatically or manually.
	1)NTSC4.43 is the color system used when
	playing back a video recorded on NTSC
	on a NTSC4.43 system VCR.

VPL-CS2/CX1

GB	Precautions
6

Features 7 GB