Bowers & Wilkins CWM6 manual

= 1x

4.6The baffle can now be fitted into the frame. Ensure that the connector on the baffle is oriented correctly with the connector in the frame. The baffle is hinged into place along its bottom edge and secured at the top by two push-lock fasteners. Push-lock fasteners are secured by pushing the head inwards – either with a thumb or a screwdriver. Please ensure that the largest groove on the fastener is orientated at a diagonal, pointing to the corner of the baffle, before pushing the fastener. As they secure, the fasteners will click. The baffle will then be secure in the frame. The diagram above illustrates inserting the baffle and securing the push-lock fasteners.

Note: Push-lock fasteners are released by turning anticlockwise with a screwdriver.

6

4.7A three position high frequency level switch is fitted to CWM600 series models, on the front face of the baffle. The centre position of the switch gives a nominally level frequency response.

The HF+ boost position can be useful where the listening environment is acoustically absorbent, for instance where carpets, soft furnishings and curtains predominate, or where the speakers are covered by curtains or wall hangings. The HF- cut position may be preferred where the listening environment is acoustically reflective, for instance where hard floors and glass predominate. The diagram above illustrates the level switch and its effect.