Cisco Systems AS5800 manual Specifications, Connecting Trunk Card Cables

Page 10

Chapter 3 Channelized T3 Trunk Card

Using the Test Port

Specifications

Table 3-2lists the CT3 trunk card specifications.

Table 3-2 CT3 Trunk Card Specifications

Description

Specification

 

 

 

Dimensions H x W x L

15.4 x 0.08 x 18.7 in. (39.12 x 0.203 x 47.5 cm)

 

without the carrier

 

15.5 x 1.23 x 19 in. (39.37 x 3.12 x 48.26 cm) with the

 

carrier

 

 

 

 

Weight

8 lb (3.6 kg)

 

 

 

 

Transmission bit rate

44,736 Mbps

 

 

 

MTBF1

Exceeds 50,000 hr

Power requirements

+3.3 VDC, 8A,

5%

 

+5.0 VDC, 15A,

5%

 

 

Regulatory compliance

Safety: UL 1950, CSA 22.2 No. 950, EN60950,

 

AUSTEL TS001, AS/NZS 3260, IEC 950

 

Emissions: CFR 47 Part 15 Class B(FCC), CISPR22

 

Class B, EN55022 Class B, AS/NRZ 3548 Class B,

 

ICES003, VCCI Class B

 

Immunity: IEC 1000-3-2, IEC 1000-3-3,

 

IEC-1000-4-2, IEC-1000-4-3, IEC-1000-4-4,

 

IEC-1000-4-5, IEC-1000-4-6, IEC-1000-4-11,

 

EN50082-1, EN50082-2

 

For additional compliance information, refer to the

 

Regulatory Compliance and Safety Information

 

document that accompanied this device.

 

 

 

1. MTBF = Mean time between failures.

Connecting Trunk Card Cables

The CT3 trunk card receives and transmits 45-Mbps signals through a 75-ohm cable, using common female BNC coaxial cable connectors. There are two female BNC connectors: one for T3 transmit data and one for T3 receive data. Use a 75-ohm coaxial cable to connect the T3 lines (see Figure 3-5).

To connect the T3 lines, follow these steps:

Step 1 Attach the end of the T3 cable directly to the BNC receptacle on the trunk card (see Figure 3-6).

Cisco AS5800 Universal Access Server Dial Shelf Card Guide

3-10

78-7097-03

 

 

Image 10
Contents Channelized T3 Trunk Card CT3 Trunk Card Power LED CT3 Clocking LED and Alphanumeric IndicatorsClocking CT1 ClockingLED Trunk Card Connectors RalmChannelized T3 Trunk Card Using the Test Port CablesDrop-and-Insert Mode Trunk Card Bantam JacksMonitor Mode AS5800# show controller t3 1/1/0 T3 1/1/0 is upSpecifications Connecting Trunk Card CablesVerifying and Troubleshooting the Installation Configuring Cable LengthConfiguring the CT3 Trunk Card Configuration CommandsCommand Description Configure clock priority, which is a value from 1 to AS5800# show controller t3 T3 1/0/0 is up Typical T1 controller configuration appears as follows
Related manuals
Manual 168 pages 22.1 Kb Manual 6 pages 32.91 Kb Manual 74 pages 39.08 Kb

AS5800 specifications

Cisco Systems has long been a leader in the networking and telecommunications field, and its AS5800 series of routers exemplify this tradition. The AS5800, along with the AS5850, AS5350, AS5400, and AS5300, provides robust solutions for service providers and enterprise-level networking applications. Each of these models has distinct features and characteristics that cater to the evolving demands of internet traffic and data processing.

The Cisco AS5800 is designed for high-capacity routing and optimized for broadband services. It supports a wide range of services, including voice, data, and video applications, making it a versatile option for service providers looking to deliver integrated solutions. It is equipped with advanced quality of service (QoS) features that ensure bandwidth is allocated effectively, holding strong even under heavy traffic conditions.

In comparison, the AS5850 offers superior processing capabilities and is typically utilized in larger-scale implementations. This model supports high-density interfaces, allowing numerous connections without compromising performance. Its architecture includes enhanced MPLS (Multiprotocol Label Switching) support, enabling more efficient traffic management and better utilization of network resources.

The AS5350 is known for its scalability and energy efficiency, ideal for voice-over-IP (VoIP) and media gateway applications. It supports various telephony features, such as protocol interworking and transcoding, making it a preferred choice for organizations focusing on digital voice technologies. The AS5300, while slightly older, continues to be a valuable asset for less demanding networks, offering reliable performance with VoIP capabilities and basic data applications.

The AS5400 bridges the gap between high-performance routing and operational efficiency. It incorporates Cisco's proprietary technologies to ensure seamless connectivity and robust failover systems. This model is highly regarded for its security features, protecting network integrity and providing peace of mind for businesses relying on sensitive data transfer.

Overall, Cisco’s AS5800 series showcases a progressive evolution of routing capabilities with enhanced features tailored for resilience, scalability, and performance. These routers not only address the technical needs of modern networks but also strategically position organizations for future growth in an increasingly digital world. Each model, with its unique attributes, continues to support the varied demands of global communication infrastructures.