Dell E04J, H476M manual Emm

LED Indicators (continued)

EMM	Three two-color LED status indicators,
	one each for the two EMM SAS ports and
	one for the EMM status
Power supply/cooling fan	Three LED status indicators for power supply
	status, power supply/cooling fan fault status,
	and AC status
Switch
System identification button	Located on the front control panel.
	This button is used to locate a system
	within a rack.
Mode switch	Located on the front control panel.
	This switch is used to switch the system
	between unified and split mode operation.
Power Supplies
AC power supply (per power supply)
Wattage	600 W
Voltage	100–240 VAC (8.6 A–4.3 A)
Heat dissipation	188 W
Maximum inrush current	Under typical line conditions and over the
	entire system ambient operating range,
	the inrush current may reach 55 A per
	power supply for 10 ms or less.
Available Hard Drive Power (Per Slot)
Supported hard drive power	Up to 1.2 A at +5 V
consumption (continuous)	Up to 0.5 A at +12 V
EMM Power (Per Slot)
Maximum power consumed by EMM	14 W at +12 V
Maximum available power	100 W at +12 V
Maximum available power	1 W at +5 V (standby)

Getting Started With Your System

9