Figure 2 – Network Properties dialog box in Windows NT 4.0.
4. Select each NIC. Determine the NIC that lists: Intel
Ethernet Adapter (10/100) (Bus 0 slot 2) in the Item Notes box.
5.Select this NIC and click Remove. This removes the NICs driver and essentially disables it from use.
6.Configure the other NIC to work properly with your network. This NIC is used for reporting events to an ICEcap Manager.
7.When finished, Click OK and reboot the system.
Step Four – Installing the BlackICE Software
The system is now prepared for the installation of BlackICE Guard. Refer to the BlackICE Guard User Guide for further instructions.
BLACKICE GUARD SYSTEM CERTIFICATION REPORT ! DELL POWEREDGE 1550 ! 3