WatchGuard Technologies 700, 4500, 2500, 1000 manual Running the QuickSetup Wizard

Page 15

Installing the Firebox III

•The Management Station is running Firebox System 4.6 or later, which has IP connectivity to the network on which the Firebox is connected.

•The network address and the netmask of the net behind the router are known.

•One or more unused IP connections are behind the router.

During remote provisioning, one light appears on the front panel Traffic Volume Indicator (on Models 1000, 2500, and 4500 only) for each successful IP address the Firebox claims. The Firebox can claim up to eight addresses.

The Process Load Indicator on Models 1000, 2500, and 4500 marks the total number of different MAC addresses the Firebox sees on the cable. If the number exceeds eight, the Firebox stops claiming addresses; the SysA light remains lit. This feature is designed to prevent an uninitialized Firebox from claiming addresses on a busy LAN. (If this happens, reboot into Enhanced System Mode and try again.)

1Attach both the Firebox External interface and the router’s interface to a common local area network, or use the red cross-over cable to connect them directly.

2Turn the Firebox off and then back on. Allow time for the Firebox to boot. Confirm that there is a flashing pattern with a red, blinking, Trusted deny light on the lower edge of the Security Triangle Display.

3Flush the router ARP cache.

Rebooting the router will usually accomplish this.

4From Policy Manager on the Management Station, select File => Open Firebox.

5Select an unused IP address behind the router on the same network to which the Firebox is attached. Set the Firebox’s read-write passphrase to wg. Set the timeout to 90 seconds. Click OK.

6If the procedure is successful, the open operation on the Management Station completes. You can then follow regular procedures described in the User Guide to configure and download a new flash image to the Firebox.

Running the QuickSetup Wizard

The final step of the WatchGuard Firebox System installation is to run the QuickSetup wizard. The QuickSetup wizard creates a basic configuration

Hardware Guide

11

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Firebox Hardware Guide Copyright and Patent Information Contents Hardware Guide Hardware Guide Limited Hardware WarrantyHardware Guide Limited Hardware Warranty FCC Certification Industry Canada CE NoticeTaiwanese Notice Vcci Notice Class a ITE Hardware requirements Installing the FireboxLocating a Firebox within a network Connecting a FireboxCabling a Firebox using TCP/IP Initializing a Firebox using a modem Running the QuickSetup Wizard Hardware Description Post-installation stepsDisarm Firebox III front view all models except Model 500Security Triangle Display Firebox III front view Model 500Disarm Armed Sys a Sys B Power Firebox III rear view all models except Model 500 Firebox III rear view Model 500 Factory DefaultEthernet Jacks Physical specifications Model 500 Physical specifications All models except Model 500Cross-over cabling Firebox System AreaEnhanced System Mode Read-only system areaManaging flash disk memory Making a backup of the Firebox software Click Yes Hardware Guide Index Management Station described

500, 700, 4500, 2500, 1000 specifications

WatchGuard Technologies is a leading provider of advanced network security solutions, offering a range of firewalls designed to cater to diverse business needs. Their series includes models like the 1000, 2500, 4500, 700, and 500, each tailored to provide robust protection while ensuring ease of use and scalability.

The WatchGuard Firebox 1000 is designed for small to medium-sized businesses looking for enhanced security and performance. It provides essential features such as intrusion prevention, malware detection, and application control. With a maximum firewall throughput of 1.5 Gbps and support for up to 4 Gbps of total VPN throughput, the Firebox 1000 can handle the demands of a growing network efficiently. It also includes centralized management through the WatchGuard Cloud, enabling administrators to oversee security policies and monitor network activity from a single dashboard.

Moving to the Firebox 2500, this model expands on its predecessor's capabilities with improved performance suitable for medium-sized businesses or branch offices. It offers a maximum firewall throughput of 3 Gbps and supports advanced threat detection technologies. The 2500 features a more extensive array of interfaces, enhancing network flexibility. Additionally, the device is equipped with built-in wireless capabilities, allowing for better connectivity and user access.

The Firebox 4500 is designed for larger enterprises, providing exceptional security and performance with a throughput of up to 8 Gbps. This model supports a modular design, allowing for additional expansion and customization to meet complex network requirements. The 4500 includes advanced features such as a high number of concurrent connections, advanced persistent threat blocking, and high-speed VPN capabilities, making it ideal for organizations with demanding network activities.

For smaller networks, the WatchGuard Firebox 700 and 500 provide essential security features at an affordable price point. The Firebox 700 offers a maximum firewall throughput of 1.3 Gbps, while the Firebox 500 targets highly mobile users with secure connectivity. Both devices include built-in firewalls, secure browsing, and threat intelligence, ensuring comprehensive protection against network vulnerabilities.

Collectively, WatchGuard’s suite of firewalls delivers robust security, centralized management, and high performance, tailored to meet the needs of various business types and sizes. These models stand out in the industry, providing powerful tools to safeguard sensitive data and maintain a resilient network environment. Through their commitment to innovation and user-friendly solutions, WatchGuard Technologies continues to be a trusted partner for organizations looking to strengthen their cybersecurity posture.
Top Page Image Contents