APW 5320
32” Wide Industrial LCD monitor
CHAPTER 7 TROUBLESHOOTING
1. The membrane power light is not ON
-Press the power On / Off on LCD membrane to check if the monitor is in the ON mode.
-Check the power cord is properly connected to the LCD display and power outlet.
2. Power does not turn ON
-Check whether the power plug is securely inserted into the receptable. 3. No picture are displayed
-Check cables for disconnection.
-Check whether the power for all inout equipment is ON.
-Check for connection to wrong terminals or for wrong input mode.
4. Remote controller does not function properly
-Check for incorrect battery orientation.
-Check for dead batteries.
-Check whether you are pointing the remote control transmitter properly at the display's receiver.
-Check for any obstacle between the remote and the display.
5. There are spots on the screen
- Check whether your AV equipment is affected by interference from automobiles, trains,
6. Degraded colors/tints
- Check whether all picture adjustments have been properly made.
7. Improper screen position/size
- Check whether screen position and size have been properly adjusted.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218