Acnodes FPC 8059 user manual Trademarks Acknowledgments

Page 6

5.Do not open the system’s back cover. If opening the cover for maintenance is a must, only a trained technician is allowed to do so. Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions:

Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This will help to discharge any static electricity on your body.

When handling boards and components, wear a wrist-grounding strap, available from most electronic component stores.

Trademarks Acknowledgments

Acnodes Corp is a trademark of Acnodes Corp.

IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corp.

Intel and Pentium are trademarks of Intel Corp.

MS-DOS, Microsoft C and Quick BASIC are trademarks of Microsoft Corp.

VIA is a trademark of VIA Technologies, Inc.

SST is a trademark of Silicon Storage Technology, Inc. UMC is a trademark of United Microelectronics Corp.

Other brand names and trademarks are the properties of their respective owners.

Image 6
Contents 5.7” VGA TFT Fan less Touch Panel PC User’s ManualPage Disclaimers Copyright 2007 by Acnodes Corp All rights reservedSeptember 2007, Version A1 Safety Approvals FCC ComplianceSafety Precautions Trademarks Acknowledgments This page does not contain any information Safety Precautions Table of ContentsSafety Approvals C h a p t e rPage Page 1.1 General Description C h a p t e rIntroduction FPC 8059 User’s Manual1.2 Specifications 1.2.1 Main CPU board1.2.2 I/O System 1.3 Dimensions 1.2.3 System SpecificationFPC 8059 User’s Manual 1.4 I/O Outlets CompactFlash card1.5 Package list 1. FPC 8059 x 2. Panel mount kit x 3. Driver CDPage Hardware Installation Hardware Installationf Compact Flash Card f PC/104 f Serial Port f Ethernet f Mounting Way 2.1 CompactFlash Card Installation 2. Install Compact Flash card in the FPC1. Remove the rubber cover at left-side 2.2 PC/104 Installation 1. Unscrew screws to remove the bracket 2. Install PC/104 module2.3 Serial Port Interface COM2 COM12.4 Ethernet 2.5 Mounting Way Panel mount3.2 Calibrate Touch Screen Windows CE.Net3.1 Survey Form Appendix