Plasmon MOD 910 user manual Packing, Transportation, Storage

User Manual

(4)Packing

Pack the unit after you have removed the disk.

Put the device in the anti-static or plastic bag.

It is desirable to use the original shock-absorbing material and packing box used when the unit was delivered to you. If not, use a box with a shock-absorbing structure that will prevent direct impacts to the device. In the case of the internal unit, protect the surfaces and interface connector against possible damage and use an anti-static bag.

(5)Transportation

!Transport the unit in a well-packaged condition, with the upside

facing up.

! Transport the unit as little as possible after unpacking, always using the shock absorbing material to avoid impact and vibration. When carrying the unit after unpacking, keep it in the horizontal plane.

(6)Storage

• Use the moisture-proof packing material for storage.

• The storage environment should meet the non-operating environmental requirement as specified in Appendix E.

!Do not expose the unit to radical changes in temperature, which could cause condensation.

viii 97705183 A