Promise Technology vtrak, m210p, m310p Contact Technical Support, Technical Support Services

Page 28

VTrak M310p, M210p Quick Start Guide

How can I be sure everything is working OK on the VTrak?

Locally: The VTrak enclosure has LEDs on the front to monitor the status of power, field replaceable units (FRUs) and logical drives. When these are green, VTrak is functioning normally.

Remotely: Check the Tree Icons in WebPAM. If there are no yellow or red warning icons displayed, VTrak is functioning normally.

What happens if a logical drive goes critical?

On the front of VTrak, the logical drive LED turns amber and an audible alarm sounds. This condition is described in Chapter 4 of the VTrak Product Manual on the software CD.

Can VTrak run using just one power supply?

Yes, it is possible to run VTrak on a single power supply. There are two power supplies so that VTrak will continue running if one of the power supply fails. But deliberately leaving one power supply off negates this advantage.

In addition, leaving one power supply off reduces air flow through the VTrak enclosure and can contribute to overheating. Always switch on both power supplies.

Contact Technical Support

Promise Technical Support provides several support options for Promise users to access information and updates. We encourage you to use one of our electronic services, which provide product information updates for the most efficient service and support.

If you decide to contact us, please have the following information available:

Product model and serial number

BIOS, firmware and driver version numbers

A description of the problem / situation

System configuration information, including: motherboard and CPU type, hard drive model(s), SATA/ATA/ATAPI drives & devices, and other controllers.

Technical Support Services

Promise Online™ Web Site

http://www.promise.com/support

 

(technical documents, drivers, utilities, etc.)

Promise Online™ eSupport

https://support.promise.com/support

 

(online request form)

 

 

28

Image 28
Contents Vtrak VTrak M310p, M210p Task List Unpack the VTrakVTrak M310p Front View M210p is similar Install Disk Drives Mount VTrak in a RackSata Disk Drives mount at the front of the carrier Network and Data Cable Connections NICSet Up Serial Cable Connections Connect the PowerSet IP Address with CLI or CLU VTrak M310p/M210p disk carrier LEDsAdministrator@cli net -a mod -t mgmt -s dhcp=enable CLICLU System Date and TimeManagement Port VTrak Setup with Embedded WebPAM Exit the CLULog-in to WebPAM Regular ConnectionHttp//192.168.10.148 Secure Connection Https//192.168.10.148VTrak M310p, M210p Quick Start Guide VTrak Setup with Embedded WebPAM Create a Disk Array Language SelectionAutomatic Express VTrak M310p, M210p Quick Start Guide Advanced VTrak M310p, M210p Quick Start Guide VTrak Setup with Embedded WebPAM VTrak M310p, M210p Quick Start Guide VTrak Setup with Embedded WebPAM VTrak M310p, M210p Quick Start Guide Additional Logical Drives Log-out of WebPAMFrequently Asked Questions Internet Connection using WebPAMAre logical drives on VTrak limited to 2.199 terabytes? Technical Support Services Can VTrak run using just one power supply?Contact Technical Support How can I be sure everything is working OK on the VTrak?United States Europe, Africa, Middle EastGermany ItalyTaiwan China
Related manuals
Manual 262 pages 40.73 Kb

m210p, m310p, vtrak specifications

Promise Technology has established itself as a strong player in the storage solutions market, particularly with its VTrak series of storage systems. Among the notable products in this lineup are the VTrak M310P and M210P models, designed to deliver efficiency, scalability, and high performance for businesses of all sizes.

The Promise VTrak M310P is a high-performance storage solution that emphasizes speed and versatility. This model supports both SAS and SATA drives, enabling enterprises to tailor their storage needs based on workload requirements. It is built with an advanced RAID engine that provides multiple RAID levels, including RAID 0, 1, 5, 6, 10, 50, and 60, ensuring data redundancy and protection against drive failures. The M310P can accommodate up to 96TB of raw storage when fully populated, catering to environments that require large amounts of data retention and quick access times.

Key features of the VTrak M310P include the intuitive management interface, which simplifies storage provisioning and monitoring. This model also incorporates Promise's innovative "HyperRAID" technology, which enhances performance by optimizing I/O operations and providing real-time analytics and reporting. Additionally, the M310P supports a variety of host connection interfaces, including iSCSI, Fibre Channel, and InfiniBand, allowing seamless integration into existing infrastructure.

On the other hand, the VTrak M210P is tailored for a slightly different audience, focusing on small to medium-sized businesses that require reliable and cost-effective storage solutions. The M210P retains several high-end features found in its bigger counterpart while offering a more budget-friendly option. This model also supports a mix of SAS and SATA drives and includes RAID capabilities similar to the M310P for data protection.

The M210P provides a robust set of management tools designed for ease of use, including automated alerts and comprehensive reporting capabilities. Its compact design and reliable performance make it ideal for remote office locations or data centers where space is a premium. Furthermore, the model incorporates advanced power management features to reduce energy consumption without compromising performance.

Both the M310P and M210P are built with scalability in mind, allowing businesses to easily expand their storage capacity as data needs grow. With a focus on durability, performance, and advanced technology, Promise Technology’s VTrak systems are well-positioned to meet the evolving demands of modern data storage. Whether for large enterprises or smaller organizations, these products offer solutions that enhance productivity and ensure data integrity.