NCR 7870 manual Specific Program Parameters, Identifier Type

7-34 Chapter 7: Programming

Specific Program Parameters

Identifier Type

The Identifier Type parameter defines the type and placement of label identifiers. You can select default identifiers that prefix the message data, unique prefix identifiers, or no identifiers.

Select the Identifier Type parameter by scanning the appropriate tag (Hex 0, Hex 2, or Hex 3). If you select default identifiers, you do not enter any other parameter in this programming mode. The factory set default is Default Prefix.

Identifier Types

1.Default Prefix - Scan the Hex 0 tag to use the default prefix. The default label identifiers vary depending on the type of bar code read. Following are the default identifiers for each bar code type.

a)UPC-A

41H NS X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 CK

b)UPC-E

45H 30H X1 X2 X3 X4 X5 X6

c)EAN-8

46H 46H X1 X2 X3 X4 X5 X6 X7 CK

d)EAN-13

46H X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 X11 X12 CK

e)Code 39

42H 31H X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 X11 X12 X13 X14 X15 X16 X17 X18 X19 X20 X21 X22 X23 X24 X25 X26 X27 X28 X29 CK

f)Interleaved 2 of 5

42H 32H X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 X11 X12 X13 X14 X15 X16 X17 X18 X19 X20 X21 X22 X23 X24 X25 X26 X27 X28 X29 CK

g)Code 128

42H 33H X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 X11 X12 X13 X14 X15 X16 X17 X18 X19 X20 X21 X22 X23 X24 X25 X26 X27 X28 X29 CK