FCC Warning | Silex technology 140-00197-100 specification

The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research.

To satisfy RF exposure requirements, this device and its antenna(s) must operate with a separation distance of at least 20 centimeters from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. End-users must be provided with specific operating instructions for satisfying RF exposure.

FCC WARNING:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Information for Canadian Users (IC Notice)

The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Regulations.

I. The device for the band 5150-5250MHz is for indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite systems.

II.The maximum antenna gain permitted (for devices in the bands 5250-5350 MHz and 5470- 5725 MHz) to comply with the e.i.r.p. limit

III.The maximum antenna gain permitted (for devices in the band 5725-5825 MHz) to comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate, as stated in section A9.2(3).

Users should be cautioned to take note that high-power radars are allocated as primary users (meaning they have priority) of the bands 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment that is installed outdoors is subject to licensing.

This device has been designed to operate with the antennas listed below, and having a maximum gain of 3.2dB @ 2.4 GHz and 4.2 dB @ 5 GHz. Antennas not included in this list or having a higher gain are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.

•Ethertronics Prestta WLAN Embedded Antenna, Part No. 1000418

•Pulse Engineering Dualband WLAN Ceramic Chip Antenna, Part No. W3006

To reduce potential radio interference to others, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than required for successful communication.

Specifications/Compliance	Silex	Page 5
140-00197-100	Revision A

140-00197-100 specifications

Silex Technology has been a pioneer in the realm of networking and connectivity solutions, with its product, the Silex Technology 140-00197-100, standing out as a noteworthy device in the industry. This versatile and robust interface module is designed to facilitate seamless connectivity in various applications, making it an ideal choice for both industrial and consumer markets.

One of the key features of the Silex 140-00197-100 is its support for a variety of network protocols, which allows it to effectively integrate with different systems and devices. It offers compatibility with protocols such as Ethernet, Wi-Fi, and USB, providing users with multiple options to connect their devices. This versatility ensures that businesses can implement the Silex module in a range of scenarios, enhancing the overall efficiency of their operations.

In terms of wireless technology, the Silex 140-00197-100 supports IEEE 802.11a/b/g/n standards, enabling high-speed wireless communication. This capability is particularly beneficial for applications that require fast data transfer rates and reliable connectivity. With its dual-band support, the device can operate on both the 2.4 GHz and 5 GHz frequency bands, allowing users to choose the optimal band based on their environment and specific needs.

Security is another critical aspect of the Silex 140-00197-100. The module incorporates advanced encryption protocols, including WPA2/WPA3, ensuring that data transmitted over the network remains secure. This added layer of security is vital for businesses that handle sensitive information, providing peace of mind to users concerned about data breaches or unauthorized access.

Another notable characteristic of the Silex 140-00197-100 is its configuration flexibility. The device can be easily set up and managed through a user-friendly web interface, making it accessible for users with varying levels of technical expertise. Moreover, it supports both static and dynamic IP addressing, allowing for customization based on the user's networking requirements.

In summary, the Silex Technology 140-00197-100 is a feature-rich connectivity solution that leverages advanced technologies to deliver reliable performance. Its support for various protocols, high-speed wireless capabilities, robust security features, and configuration flexibility make it an ideal choice for diverse applications, ranging from industrial automation to consumer electronics. As the demand for efficient and secure connectivity continues to grow, devices like the Silex 140-00197-100 will undoubtedly play a crucial role in shaping the future of networking solutions.