Installation, Options | HSM CMN4000R, CMN3000R manual

INSTALLATION

The CMN Series unit is designed for installation in a protected environment. Units may be installed in a 19" rack system. The system is lightweight and can be easily moved. Some

important points to consider when positioning a unit for operation:

∗A properly rated (preferably dedicated) outlet is accessible for the power cord supplied with the unit. It is not recommended to modify the supplied cord in any way nor should an extension cord of any kind be used.

∗The cord paths in the system installation should remain clear of foot traffic or anything else that may disturb permanent connection.

∗The installation site should maintain an ambient air temperature of less than 40oC. When the environment for the system remains cooler during operation, there is less stress on the batteries and the internal electronics.

∗The air inlets, vents and fan should not be obstructed or blocked in any way.

T H E C O N T I N U O U S P O W E R C O M P A N Y

∗The air should remain free from excessive dust and chemical fumes.

∗The front panel is designed to fit in a standard 19" rack. This panel fills a 5 ¼” slot. Guide Rails or slides are recommended to support the unit's mainframe. This system weighs in excess of 85 pounds; front panel mounting is not intended to support the entire unit. The system has pre-tapped aluminum slide bars available to accept some standard slide configurations. Contact the factory for optional slide kits and accessories if assistance is required in properly mounting in a rack.

Once a location has been selected and the external battery pack is connected, it is ready for operation.

Allow at least 48 hours, after the system is first installed, to fully charge the external battery to a maximum state. Charge time depends on the size of batteries used.

OPTIONS

This rackmountable UPS is supplied with a matching rackmountable auxiliary battery box. This battery box is designed to host one or two strings of batteries, to extend battery support times. The additional time is dependent on the unit capacity and load size.

The battery pack is rated at 96VDC and comes with a mating cable that directly connects to the battery port at the rear of the UPS. This connector is exposed, after removing the attached cover plate. The connector on the battery and UPS are the same so that the cable can be plugged in either way. The connector used is a locking type, when fully engaged, will not allow the cable to be pulled apart, unless the locking ears are depressed.

The battery box fits a 3 1/2” slot into a 19” rack, just like the UPS. The full depth of the battery, however, is only 23”. It is slide ready and weighs approximately 48 pounds in a single battery configuration. It weighs 85 pounds in a dual battery configuration. An additional port is available at the rear of the battery box to add continuous battery strings if necessary.

The battery box is designed to be upgradeable. If the single string is not adequate, the user may order an additional string of batteries that can be easily installed in the existing box. By removing the existing mounting screws on the existing battery, it can slide over and the additional set can now be secured, with four additional screws, adjacent to the original set. The internal harness has an open connector provided for the second set. After plugging this connector together, the upgrade is complete.

Page 10

CMN4000R, CMN3000R specifications

The HSM CMN3000R and CMN4000R are advanced data security solutions designed for organizations that require high levels of data protection and compliance. Both models are part of HSM's larger portfolio of hardware security modules (HSMs) that ensure the confidentiality, integrity, and availability of sensitive information.

One of the most notable features of the CMN3000R and CMN4000R is their robust encryption capabilities. These devices support a variety of encryption algorithms including AES (Advanced Encryption Standard), RSA (Rivest-Shamir-Adleman), and ECC (Elliptic Curve Cryptography). This flexibility allows organizations to choose the encryption standards that best meet their security needs, ensuring strong data protection against unauthorized access.

Both models are equipped with HSM's cutting-edge key management technology. This includes secure key generation, distribution, storage, and destruction, ensuring the lifecycle of cryptographic keys is managed securely. The modules are designed to comply with global security standards such as FIPS 140-2 Level 3, ensuring they meet stringent regulatory and industry requirements.

Another prominent feature of the HSM CMN3000R and CMN4000R is their high availability options, which support redundant setups and failover capabilities. This ensures that critical security operations can continue uninterrupted, even in the event of hardware failure. This is particularly important for organizations that rely on real-time data encryption and decryption for operational continuity.

The devices also boast impressive performance metrics. The CMN4000R, in particular, is designed to handle high throughput, with the ability to process thousands of cryptographic operations per second, making it ideal for large-scale applications where speed is essential.

In terms of connectivity, both models feature multiple interfaces including USB, Ethernet, and serial options, allowing them to integrate seamlessly with existing infrastructures. This adaptability enables organizations to deploy the HSMs in a variety of environments, whether on-premises or in cloud-based systems.

Additionally, the CMN3000R and CMN4000R provide strong physical security features such as tamper-evident sealing and hardware-based protection against physical attacks, safeguarding against unauthorized access to the device itself.

In conclusion, the HSM CMN3000R and CMN4000R represent cutting-edge solutions for organizations determined to bolster their data security posture. With their comprehensive encryption capabilities, advanced key management, high availability options, impressive performance, and robust physical security features, these HSMs stand out as essential tools in the fight against data breaches and cyber threats.