MENU OPTIONS
SYSTEM
1. AUDIO INPUT
To choose one of 4 channels to record. (can only select 1 during operation for recording)
2. INT AUDIBLE ALARM
To set the INTERNAL AUDIBLE ALARM. It will be trigged by event occurrence when the setting is ON.
3. EXT AUDIBLE ALARM
To set the EXTERNAL AUDIBLE ALARM. It will be trigged by event occurrence when the setting is ON.
(MENU)
SEARCH
TIMER RECORD CAMERA
►SYSTEM
EVENT NETWORK
4. MOTION AUDIBLE ALARM
To set the MOTION AUDIBLE ALARM. It will be trigged by motion detection occurrence when the setting is ON.
5. ALARM DURATION
Set the reaction time which was determined by the length of alarm mode responded to a buzzer. Default setting is 10 sec. Options are 10 SEC, 15 SEC, 20 SEC, 30 SEC, 1MIN, 2MIN, 3 MIN, 5 MIN, 10 MIN, 15 MIN, 30 MIN, ALWAYS.
6. DWELL TIME
DWELL TIME is the time period that each channel sequentially shown on call monitor.
7. MESSAGE LATCH
To select whether the DMR messages will disappear after 10 sec or remain on screen. NO is the default setting which the messages will go away after 10 sec.
NOTE : Video loss, Alarm and Motion messages will be shown the same as Alarm Duration time.
8. TITLE DISPLAY
To set the title shown on monitor or not.
9. TIME DISPLAY
To set the time format on the DMR.
10. TIME
To set the correct time on the DMR.
(SYSTEM)
►AUDIO INPUT : 1
INT AUDIBLE ALARM : ON
EXT AUDIBLE ALARM : ON
MOTION AUDIBLE ALARM : ON
ALARM DURATION : 10 SEC
DWELL TIME : 02 SEC
MESSAGE LATCH : NO TITLE DISPLAY :ON TIME DISPLAY : Y/M/D
NEW PASSWORD : XXXX
CLEAR HDD : NO
SYSTEM RESET : NO
10