FieldServer FS-8700-114 X30 instruction manual Appendix B.3 Master Status Codes

Page 13

FS-8700-114 DeviceNet Master Manual

Page 13 of 15

 

 

alwayspowersupinIdlemodeandcanbesettoRun modeautomaticallywithapreloadsectionor fromtheServersideprotocoloftheFieldServer. Thefollowingpreloadsectioncanbeplacedinthe configurationfiletoplacethescannerinRunmode atpowerup:

Preloads

 

 

 

Data_Array_Name,

Preload_Data_Format,

Preload_Data_Value,

Location

Command_Reg,

Bit,

1,

0

OffsetzerooftheStatusDataArrayindicatesthe

Scanner’sactualmodeachieved.Anonzerovalue

indicatestheScannerisinRunmodeandavalueof

zeroindicatesthescannerisinIdlemode.

Appendix B.3.

Master Status Codes

 

 

TheMasterStatuscodesdisplayedontheFscreena

redepictedbelow:

 

FieldServer Technologies1991TarobCourtMilpitas,California95035USA

Web:www.fieldserver.com

Tel:(408)2622299

Fax:(408)2622269

Toll Free:(888)5091970

email:support@fieldserver.com

Image 13
Contents Applicability & Effectivity Driver Manual FS-8700-114 X30 DeviceNet Master AdapterTable of Contents Max Nodes Supported X30 DeviceNet Master DescriptionOptional Items Required 3rd Party ConfigurationHardware Connections Connector PinoutsHardware Connection Tips / Hints DeviceNet Settings Configuring the FieldServer as a DeviceNet Master063 Client Side Node Descriptors Client Side Connection DescriptorsDriver Specific Map Descriptor Parameters Rdbc Map Descriptor ExampleWord WrbcLED 3 Module Status LED 4 Operation ModeAnybusm Devicenet MASTER/SCANNER Appendix A.2. Using RSNetWorxAppendix B.2 Using the Command and Status Data Arrays Appendix B.3 Master Status Codes Page FieldServer Appendix B.5. Accessing Parameter Data in Remote Slaves