Hardware Installation, Driver Setup, Thank You

1394 PCI Adapter Card Installation Guide

1 PRE INSTALLATION

Thank You

Thank you for selecting a Maxtor 1394 PCI Adapter Card.

Verify your Windows version by right clicking on My Computer icon, then click on Properties.The window below will appear.

1394 PCI Adapter Card

Installation Guide

2 HARDWARE INSTALLATION

Handling Precautions

Make sure you are properly grounded and handle the 1394 PCI Adapter Card by its edges only.

Hardware/Operating System

Requirements

•Pentium II-class or higher

•An available 32-bit PCI slot

•Windows 98 Second Edition

•Windows Millennium

•Windows 2000

3 DRIVER SETUP

Adapter Card Installation

Installing the 1394 PCI Adapter Card in a system is a simple process.The card fits into any available 32-bit PCI slot on your computer system's motherboard.

1.Remove the cover of your computer system.

2.Remove the inside slot cover of an available 32-bit PCI slot on the motherboard.

3.Install the 1394 PCI Adapter Card into the open slot (Figure 1).

4.Fasten the 1394 PCI Adapter Card bracket to the system case.

Figure 1

Installing the Adapter Card into a PCI Slot

1.Once you have installed your 1394 PCI Adapter Card, start your computer.You will see that the Windows Installation Wizard has detected “New

Hardware OHCI Compliant IEEE 1394 Host Controller”.

2.The Wizard will prompt you for the location of your Windows drivers.

3.Insert your Windows CD into your CD-ROM drive and specify CD-ROMby clicking in the CD-ROM box and then click "Next."

4.Click on “Next.”