FieldServer FS-8704-01 instruction manual Hardware Connections, Hardware Connection Tips / Hints

Page 5

FS-8704-01 SMC TCP/IP Driver Manual

Page 5 of 12

3.Hardware Connections

The FieldServer is connected to the Ethernet network as shown in the connection drawing.

 

Ethernet Hub or Switch

N1

N1

FieldServer 1

FieldServer 2

3.1.Hardware Connection Tips / Hints

Please use the appropriate category Ethernet cable, i.e. At least CAT5 for a 100Mb/s connection.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com

Page 4 Page 6
Image 5
Page 4 Page 6
Contents FS-8704-01 SMC TCP/IP Table of Contents SMC TCP/IP Description Max Nodes Supported FieldServer Mode CommentsRequired 3rd Party Software Required 3rd Party ConfigurationHardware Connection Tips / Hints Hardware ConnectionsData Arrays/Descriptors Configuring the FieldServer as a SMC TCP/IP ClientClient Side Node Descriptors Client Side Connection DescriptionsTiming Parameters Driver Related Map Descriptor ParametersMap Descriptor Example Server Side Connection Descriptors Configuring the FieldServer as a SMC TCP/IP ServerServer Side Node Descriptors This page Intentionally Left Blank
Top Page Image Contents