| Page 5 of 15 |
3.Hardware Connections
Make sure the device IP_address is configured to be on the same IP network as the FieldServer. Use a crossover cable if the FieldServer is connected directly to the PLC device. Use a straight cable if the FieldServer is connected to a hub.
Configure the PLC according to manufacturer’s instructions
|
| PLC |
|
|
| Ethernet Interface | |
SITE |
| ||
ETHERNET |
|
|
|
|
|
| |
|
| ||
|
| FIELDSERVER |
|
|
|
| |
| CONNECTION DIAGRAM |
| |
| BASE NAME: | DATE: 5/04/04 | |
| FILE NAME: | BY: | MC |
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)