AddressRight® DA400 Printer | Installation Instructions |
|
|
B.Hold the Wire Frame As- sembly nearly vertical with the Feed Ramp on the up- per end and the Deflector Plate on the lower end.
C. Insert the Deflector Plate and Slide into the channel in the Upper Floor Assem- bly. Slide the Wire Frame Assembly to the center of the floor. When properly installed, the slide is con- tained in the channel by the lips on both sides of the channel.
D.Locate the Clamp Knob on the back of the printer’s Upper Floor Assembly. Turn to loosen the Clamp Knob and move it over to align it to the center of the Wire Frame Assembly.
SV61187 Rev. B | Page 3 of 8 |