Note: When creating a spooler to be used in a mixed Operating System environment, remember that Windows® 95/98 require the spooler name to be 12 characters or less
2.At the client Windows machine, either log into the same domain as the Imation Matchprint™ Professional Server, or connect to the Imation Matchprint™ Server with a valid user name and password that has a minimum of read access. For security purposes, Imation does NOT recommend enabling the Guest Account.
Failure to do so will result in Windows 2000 clients receiving the following error message when trying to print an image: "Could not complete the print command because the selected printer driver could not be found. Please select a printer from the control panel and try again."
Workgroup Environment Considerations: In a Workgroup environment, the Imation Matchprint™ Professional Server must be a member of the same workgroup as the client workstations.
3.At the Start button, select Settings, then Printers.
4.
5.With the Network printer server selected, click on Next.
6.Using the Add Printer Wizard, browse to the location of the RIP print server and select the spooler created in step 1.
7.Click OK.
8.Select Yes to have this printer set as your default printer. Click Next. A message appears saying the printer has been successfully installed.
9.Click on Finish. The printer is now added to your system.
10.Using the Windows client design application, choose Page Setup. Click Printer and select the spooler name as created in step 1. Note that the Printer Where location reflects the RIP's spooler pathname. Click OK.
11.Click OK to close the Page Setup dialog box. You are now ready to print.
Note: Some design applications require the print spooler to be selected as the default printer. Failure to select the Matchprint™ Professional Server as the default printer may not allow your design application to print to the Xerox® DocuColor 12™. The following type of error might appear, "Could not complete the Page Setup command because the selected printer driver could not be found. Please select a printer from the control panel and try again."
If you get this type of error, change the default printer in your Printer Control Panel. Click on Start>Settings>Printers. Click once on the Matchprint™ Professional Server print spooler name and click File - Set as Default. Launch your design application, open the file to print, and either select to print or choose Page Setup and select the Matchprint™ Professional Server print spooler.
18 | Imation Matchprint™ Professional Server Quick Start |