Dip Switch Settings

The DPP-250 is designed to use different methods of communications. Care must be taken to ensure that the DIP Switches are not changed from its default factory configuration unless required.

♦DIP SWITCH SETTINGS:

The printer has two absolutely different operation modes.

They are determined by the state of switch Sw2:

•Continuous Paper mode

•Black Mark mode

These two modes detect paper present conditions differently. The black mark searching mode is designed for proper alignment of the starting print position on indexed media with printed information.

Switch	OFF	ON

Sw1	Not used

Sw2	Continuous Paper mode	Black Mark mode

Sw3	Hardware protocol	Xon/Xoff protocol

Sw4	Normal operation mode	Protocol mode

Table 6

Infinite Peripherals, Inc.

www.ipcprint.com. . . . . . . . . . . .Page. . .14. . . . .

DPP-250 User Manual v1.01

Dip Switch Settings

♦DIP SWITCH SETTINGS:

OFF