Iiyama E2207WSV user manual Special Notes on LCD Monitors, Customer Service, Cleaning

Page 6
Spray-type cleaner Wax
Acid or Alkaline solvent

ENGLISH

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitors and do not indicate a problem.

 

When you first turn on the LCD monitor, the picture may not fit in the display area

NOTE

 

because of the type of computer that is used. In this case, adjust the picture position

 

to the correct position.

 

Due to the nature of the backlight, the screen may flicker during initial use. Turn off

 

the Power Switch and then turn it on again to make sure the flicker disappears.

 

You may find slightly uneven brightness on the screen depending on the desktop

 

pattern you use.

 

Due to the nature of the LCD screen, an afterimage of the previous screen may

 

remain after switching the image, when the same image is displayed for hours. In

 

this case, the screen is recovered slowly by changing the image or turning off the

 

Power Switch for hours.

 

Contact your dealer or iiyama service center for the backlight replacement when the

 

screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.

CUSTOMER SERVICE

NOTE The fluorescent light used in the LCD monitor may have to be periodically replaced. For the warranty coverage on this component, please check with local iiyama service center.

If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for advice or replacement packaging.

CLEANING

WARNINGIf you drop any materials or liquids such as water into the monitor when cleaning, unplug the power cable immediately and contact your dealer or iiyama service center.

CAUTIONFor safety reasons, turn off the power switch and unplug the monitor before you clean it.

NOTE

To protect the LCD panel, do not scratch or rub the screen with a hard object.

Never use any of the following strong solvents. These will damage the cabinet and the LCD screen.

Thinner

Benzine

Abrasive cleaner

Touching the cabinet with any product made from rubber or plastic for a long time may cause degeneration or loss of paint on the cabinet.

CABINET

Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then

 

wipe the cabinet with a soft dry cloth.

LCD

Periodic cleaning with a soft dry cloth is recommended.

SCREEN

Don't use tissue paper etc. because these will damage the LCD screen.

3 FOR YOUR SAFETY

Image 6
Contents English Deutsch Français Nederlands Polski CE Marking Declaration of Conformity Table of Contents For Your Safety Safety PrecautionsDo not Touch the Plug with WET Hands Customer Service CleaningSpecial Notes on LCD Monitors Features Cheking the Contents of the PackageBefore YOU Operate the Monitor HOW to USE the Stand It falls or is droppedControlsfront Paneland Connectorsntrol Connecting Your Monitor Computer Setting Adjusting the Viewing AngleAdjusting Operating the MonitorAdjustment Menu Contents Audio Menu Image Adjust Setup Menu Screen Adjustments  Press the Auto Button. Auto Adjust English Power Management Feature Trouble Shooting Power indicator does not light up Power indicator is blueRecycling Information SPECIFICATIONSProLite E2207WSV AppendixDimensions Compliant TimingIiyama Servicecard