English

selection area, select “OTHERS.” Kindly suggest you auto scan all the channels before watching your TV for the first time.

Note: After auto scanning all the channels, you need not to do it again when turning on your TV next time.

Manual Store: To search the detectable channels and store them into memory manually.

1.Press ◄ or ► to get into “Manual Store.”

2.Move the cursor to “Prog. No, “ and select the desired channel position with ◄►.

3.Move the cursor to “System,“ and select the system according to your local area with◄►.

4.Move your cursor to “Search,” and search the detectable channels with ◄►.

5.Move your cursor to “Fine Tune,” and adjust the picture with ◄►.

6.Move to Store, then Store the instruction with ENTER.

Note: The channel will be stored instead of the former program.

Name: To enter a name for program with 0~9 and A~Z. Press ◄ or ► to get into “Name.”

1.To enter a name:

Press red key (on the remote control) to edit a name for the channel.

Use ▲▼ to select the desired letter and use◄► to move the cursor to enter next letter. After the desired name is entered, press blue key (OK) to confirm.

2.To Erase/ Add channels:

Use ▲▼ to select the desired channel.

Press yellow key to erase the channel or press green key to add it.

When using ▲CH▼ key, the channels you erased will be passed over. You may press green key to add the erased channels or use Auto Scan function to re-present them.

3.To exchange one channel with another:

Press blue key to enter the function of “Sort,” and the following screen will show.

If you want to exchange channel 1 with channel 2: