N u | Iiyama PL2202W, PL2201W guide

Menu : 2	DCR	M e n u : 2
(Analog)	OFF	M e n u : 2
(Analog)

1680 × 1050

H : 6 5 . 4 K H z V : 6 0 . 1 H z

Adjustment Item	Problem / Option		Button to Press
Auto Set-up *3	NO	Return to Menu.
Auto Set-up *3	YES	Adjust Clock, Phase, V-Position and H-Position
Direct	YES	Adjust Clock, Phase, V-Position and H-Position
Direct		automatically.
	Setting	Off	The Auto Set-up is not performed when the
			signal input is changed.
		On	Adjust Clock, Phase, V-Position and H-Position
			automatically when the signal input is changed.
NOTE The brightness of screen varies for several seconds during the adjustment.
This function is not performed automatically when changing the signal input because
the factory-preset of “Setting” in Auto Set-up is set to Off.

ENGLISH

Color Temp.

1Color 1: 9300K

2Color 2: 7500K

3Color 3: 6500K

s sRGB

	R	Too weak
	G	Too weak
(User)	G	Too strong
	B	Too strong

NOTE sRGB is an international standard which defines and unifies the difference of color
	appearance between equipment.
You can not adjust the Brightness, Contrast, Gamma and Economy Mode during sRGB
	mode because those settings are locked.
	is displayed while sRGB is active.

Sharpness

1 2 3 4 5

Adjust the picture quality at resolutions of less than 1680 × 1050.

You can change the picture quality from 1 to 5 (sharp to soft). Press the + Button to change the picture quality in numerical order. Press the – Button to change the picture quality in reverse numerical order.

*3 For best results, use the Auto Set-up in conjunction with the adjustment pattern. See page 21 for

SCREENADJUSTMENTS.

Direct See page 13 for Direct adjustment.

OPERATING THE MONITOR 15

Iiyama PL2202W, PL2201W user manual N u

Menu : 2

M e n u : 2

1680 × 1050

H : 6 5 . 4 K H z V : 6 0 . 1 H z