STARTUP
1.First start your PC and then turn on your monitor using the power switch (① in fig. 4). The status indicator (① in fig. 4) should light up green.
2.Adjust the image to meet your requirements (see the following sections “Basic Setup” and “Image settings using the OSD menu”).
3.If there is no image displayed on the monitor, consult the section “Troubleshooting”.
BASIC SETUP
・Automatic Image Adjustment
You can adjust the image settings (such as brightness, contrast, image position, phase, etc.) manually or by using the LCD monitor’s automatic image adjustment feature. This will adjust the image parameters to their optimal settings for the current graphics mode. Press AUTO (① in fig. 4) to launch the automatic adjustment. The process will take a short while until completed.
・Setting the volume directly
You can adjust the speaker volume of the integrated audio system directly by pressing the ▶ buttons (④ in fig. 4 ) while the OSD menu is inactive. Next press the ▶ button to increase the volume or the ◀ button to decrease it.
・ Shortcut for adjusting brightness and contrast
You can adjust brightness and contrast directly by pressing the ◀ buttons (④in fig. 4) while the OSD menu is inactive. Next, press the ◀ or ▶ buttons (④and⑤ in fig. 4) to adjust the brightness or the ◀ or ▶ buttons (④and⑤ in fig. 4) while the OSD contrast.
4