Controls and Connectors

<Front>

<Back>

APower Switch / Power Indicator (POWER)

Green: Normal operation (ProLite H511S) NOTE Blue: Normal operation (ProLite H511S-B)

Orange: Power Management

The monitor enters into power management mode which reduces the power consumption to less than 5W when receiving no horizontal and/or vertical sync signal.

BAuto Button (AUTO)

See page 13 for Auto Set-up.

CExit / Volume Button (EXIT /)

D+ / Brightness Button ( + /)

E– / Contrast Button ( – / )

FMenu Button (MENU)

GInput Button (INPUT)

Select either Analog or Digital for the signal input when both of the signal inputs are connected to a signal source. Switch D-SUB and DVI-D whenever pressing the input button.

NOTE When only one of the two signal inputs is connected to the signal source, the one connected is automatically selected. Input Button is not available if there is no signal input from the selected connector or during the power management mode.

HHeadphone Connector

ISpeakers

JAC Connector (AC IN)

KMain Power Switch

LAudio Connector (LINE IN)

MDVI-D 24pin Connector (DVI-D)

ND-sub mini 15pin Connector (D-SUB)

OKeyhole for Security Lock

NOTE You can fasten a security lock and cable to prevent the monitor from being removed without your permission.

ENGLISH

BEFORE YOU OPERATE THE MONITOR 7