IronKey Enterprise manual Using the IronKey Unlocker on Linux

2 Choose which action to take	By selecting the corresponding checkbox before un-
when you unlock it.	locking your IronKey, you can view your secure files
	and/or unlock your IronKey in Read-Only Mode.

3Locking & unplugging the IronKey Clicking “Lock Drive” will exit open IronKey applica- tions and lock the device. It is then safe to unplug it from your computer.

NOTE: In IronKey Enterprise, you may not be allowed to change the device password or unlock your IronKey on a Mac, depending on your System Administrator’s configuration.

Using the IronKey UNLOCKER on LINUX

IronKey has extended its core platform compatibility to include Linux systems. If enabled, you can manage your secure files on Linux (2.6+), allowing you to securely transfer files from and between Windows and Linux computers.

Depending on your Linux distribution, you may need root privileges to use the program ‘iron- key’ found in the Linux folder of the mounted virtual CD-ROM. If you have only one IronKey attached to the system, simply run the program from a command shell with no arguments (e.g. “ironkey”). If you have multiple IronKeys, you will have to specify the device name of the one you wish to unlock.

Note that ‘ironkey’ only unlocks the secure volume; it must then be mounted. Many modern Linux distributions will do this automatically; if not, run the mount program from the command line, using the device name printed by ‘ironkey’.

‘ironkey’ may also be used to lock the device. Use:

ironkey --lock [devicename]

to lock the IronKey named “devicename”, and:

ironkey --read-only

to unlock the IronKey in Read-Only Mode.

Note that simply unmounting the device will not automatically lock the secure volume.To lock the device you will have to either unmount and physically remove (unplug) it, or else run:

ironkey --lock

IRONKEY ENTERPRISE USER GUIDE PAGE 11