Specific LB-2/LB2 VPN/ VPN 800 setups for most major ISPs
This guide was constructed to aid you through all types of configurations used by most major ISPs, and set them up on your
Bell South
Connection Type: PPPoE
Bell South uses the PPPoE protocol which requires you to input a user name and password. If you used any software to connect to the internet please uninstall it now as you will no longer need it. Once you have done that, login to the LB2/LB2 VPN/VPN 800 WAN Router by going to http://192.168.1.1 using your favorite web browser. Set the connection type to PPPoE and input your user name and password into this PPPoE field, leave PPTP unchecked. Press the Submit button at the bottom of the page and you are done. Also, set the Echo Retry to 90 seconds under Advanced Port, Port Options menu.
Comcast
Connection Type: Dynamic IP
During the installation of your cable internet services, the installer should have paperwork with your registration information, copy down MAC address or Adapter Address from that a piece of paper. If you do not have this information, you can find out your MAC address by going to Start>Run, type in CMD and press enter. In the Command Prompt enter ipconfig/all and write down your MAC address. Once you have done that, login to the LB2/LB2 VPN/VPN 800 WAN Router by going to http://192.168.1.1 using your favorite web browser. Set the Connection type as Dynamic IP and scroll down to Optional. In the MAC address field , type in that MAC address separated by hyphens. (Example:
Cox
Connection Type: Dynamic IP
During the installation of your cable internet services, the installer should have paperwork with your registration information. The next step is to copy down the Domain Name from that piece of paper. You may also call Cox to find out your Domain name. Once you have done that, login to the LB2/LB2 VPN/VPN 800 WAN Router by going to http://192.168.1.1 using your favorite web browser. Set your connection type as Dynamic IP and scroll down to Optional. In the Domain Name field enter your Domain Name. Press the Submit button at the bottom of the page and you are done.
Earthlink
Connection Type: PPPOE
Earthlink uses the PPPoE protocol which requires you to input a user name and a password. If you used any software to connect to the internet please uninstall it now as you will no longer need it. Once you have done that, login to the LB2/LB2 VPN/VPN 800 WAN Router by going to
Property of HotBrick — 2005 | 2 |