Hanns.G HH241, HSG1078 User’s Manual, For VGA only, DVI that supports HDCP video YUV format

User’s Manual

H-POSITION	Select the「H-POSITION」option to shift the screen image to the
	left or right. Enter the option and adjust the level. [For VGA
	only]
V-POSITION	Select the 「V-POSITION」option to shift the screen image up or
	down. Enter the option and adjust the level. [For VGA only]
CLOCK	Select the 「CLOCK」option to reduce the vertical flicker of
	characters on the screen. Enter the option and adjust the level.
	[For VGA only]
PHASE	Select the「PHASE」option to reduce the horizontal flicker of
	characters on the screen. Enter the option and adjust the level.
	[For VGA only]
SHARPNESS	Select the「SHARPNESS」option to adjust the sharpness of the
	display. Set the value from -2 to 2.
	Choose「VIDEO MODE」or 「PC MODE」for video
	transmission. While using HDMI or HDMI to DVI ports for
VIDEO MODE	video transmission, the video will appear cut off slightly around
	the edge; choose「PC MODE」to view videos with complete
	image. (VIDEO MODE only functions for inputs from HDMI or
	DVI that supports HDCP video (YUV format))
	Setup the display response time through the Response time
RESPONSE TIME	function. Available settings are MINIMUM,
	INTERMEDIATE, and MAXIMUM. [This feature is limited to
	specific models only.]
OSD SETTING
LANGUAGE	Select 「LANGUAGE」 option to change the language of the
	OSD. Enter the option and select a language. [Reference only,
	the OSD Language depends on the selected model]
H-POSITION	Select「H-POSITION」option to adjust the horizontal position of
	the OSD. Enter the option and adjust the level.
V-POSITION	Select 「V-POSITION」option to adjust the vertical position of
	the OSD. Enter the option and adjust the level.
TRANSPARENCY	Select 「TRANSPARENCY」option to adjust the transparency of
	the OSD. Enter the option and adjust the level.
OSD TIME-OUT	Select 「OSD TIME-OUT」option to set the OSD time out from
	10 to 100 seconds. Enter the option and adjust the level.

16