HANNspree SN12E2 Setting Bios and Install a new Windows 7 system, Make sure you have these ready

Install Windows 7 in Notebook

Make sure you have these ready:

An USB DVD drive, a Notebook driver CD, Windows 7 Install CD

Before you continue :

■Shut down your computer

■Connect the USB DVD drive to an USB port of Notebook and connect the power cord to AC power

2-1 Setting BIOS and Install a new Windows 7 system

1.Power on your Notebook, then press <Del> to enter BIOS setup during POST, set "1st Boot Device" to "USB : SONY DVD-ROM D"(DVD drive name) in "Boot" -> "Boot Device Priority" menu, the figure is shown as below. And then save changes and exit BIOS.

		BIOS SETUP UTILITY
		Boot
Boot Device Priority			Specifies the boot
			sequence from the
1st Boot Device		[USB : SONY DVD-ROM D]	available devices.
2nd Boot Device		[HDD : PO-WDC WD2500B]	A device enclosed in
			parenthesis has been
			disabled in the
			corresponding type
			menu.
			↑↓ ←→ : Move
			+/-/	:Change Option
			Enter:Select
			Esc	:Exit
			F1	:General help
			F2/3	:Change color
			F9	: Optimal defaults
			F10 : Save and exit
v02.67	(C)Copyright 1985-2009, American Megatrends, Inc.

2.Put the Windows 7 Install CD into the USB DVD drive.

3.The computer will reboot, and it will start loading files for installing Windows 7 system.

4.After that, it will start Windows and come out a “Install Windows” dialog box to set the “Language to install”, “Time and current format” and “Keyboard or input method”. Click “Next” to continue and click “Install now” button to start the setup.

5.When the license terms appears, select to accept and click “Next” to continue.

6.It then asks you to select the installation type. Click “Custom (advanced)” to install a new copy of Windows.

2

15