Hanns.G HG221A, HSG1061 manual Making Connections, User’s Manual, Connecting To A Pc

Page 10

User’s Manual

MAKING CONNECTIONS

Turn off your computer before performing the procedure below.

1.Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer’s D-Sub port.

2.Connect the audio cable between the monitor's audio input and the PC's audio output (green port).

3.Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to Wall outlet.

4.Turn on your monitor and computer.

Figure.2. Connecting to a PC

Image 10

Contents HG221A HSG1061User’s Manual FCC Class B Radio Frequency Interference StatementCANADA Energy CongratulationsErgonomics EmissionsRECYCLING INFORMATION TABLE OF CONTENTS SAFETY NOTICE PRECAUTIONSSPECIAL NOTES ON LCD MONITORS Lamp DisposalBEFORE YOU OPERATE THE MONITOR FEATURESCHECKING THE CONTENTS OF THE PACKAGE The product package should include the following items LCD MonitorINSTALLREMOVE INSTALLATION INSTRUCTIONSPOWER INSTALLATIONMAKING CONNECTIONS CONNECTING TO A PCADJUSTING THE VIEWING ANGLE GENERAL INSTRUCTIONS OPERATING INSTRUCTIONSCONTROL PANEL BUTTONS Power Indicator FRONT PANEL CONTROLPower Button AdjustCOLOR SETTING HOW TO ADJUST A SETTINGSINPUT SETTING IMAGE SETTINGthe OSD Language depends on the selected model OSD SETTINGFor VGA only SYSTEMPLUG AND PLAY Plug & Play DDC2B Feature select Properties Settings Screen Resolution . Use the TECHNICAL SUPPORT FAQQ & A FOR GENERAL PROBLEMS A ButtonRESOLUTION ERROR MESSAGE & POSSIBLE SOLUTIONSFACTORY PRESET TIMING TABLE CABLE NOT CONNECTED65.29 1600x1200@60Hz1680x1050@60Hz 59.954SPECIFICATIONS APPENDIX